Me too...
HSS between curves should work well...
Over the sinews tolerance you can influence how “clear” the contours should look like...
With a value of 0.0001 you will get very ”clear”...
Type: Posts; User: radius37
Me too...
HSS between curves should work well...
Over the sinews tolerance you can influence how “clear” the contours should look like...
With a value of 0.0001 you will get very ”clear”...
Is there anybody that uses an interface to TDM??
We will soon be confronted with that topic...
Many thanks and kind regards
Is there anybody that uses an interface to TDM??
We will soon be confronted with that topic...
Many thanks and kind regards
Hi
Well in the 2.5D area I have no problems...
We noticed a few times that the selected surfaces in HSS Jobs or 5X processing’s cannot be displayed anymore .. or the jobs can’t even be calculated...
Hi
sorry I quickly read it somewhere I really cannot think where though.. Might be in the technician forum.
It is actually a pretty simply contour but unfortunately one machine that has an older...
Hello everybody
I have read somewhere that it is possible to adjust software versions on the PC programming station?
Is that correct?
I would like to try out a contour.
On our machines...
Hello everybody
Question: Is it possible to work with both systems on one machine?
Meaning one program with neutral point and another program with preset?
Is that impossible? Would that be too...
Good morning
I only have the problem when we want to calculate a HSM processing or a 5 axial one (so all bigger stuff).
Yes, we close and reopen the program- then it works.
But is there a...
Hello everybody
I sometimes have the problem that the following error comes up when I want to calculate a bigger job in Solid CAM:
--- Solid Works can’t access the necessary memory---???
...
Hello everybody
I have a problem with the CYCLE DEF 208:
It’s not displayed in Solid Verify.
Anyway not in the spiral tracks. I guess it because you can find it under drilling job.
Has...
Ah thanks a lot…
They belong to the construction,
Good then I wont need to use them as our construction department works with ProE.
Thanks for the information
Greetings
Hello everybody
On the DVDs there is always a file to install which is called SolidCAM Utilities.
What do I need it for?
Many thanks
Regards
Hiya!
We weren’t confident either that SolidCAm is for turning BUT with the coming version...
A while ago, we attended a workshop that showed us the new functions in SolidCAm 2011 milling.
(...
Super thanks!!!
I was in the wrong function all the time.. the linear cut function.
Have a nice day!!
Hi speedy1
That how I wanted to do it too... but unfortunately I can’t find a function under ‘held cut’ that allows me to choose ‘along the curve’ or something similar.
Or do I have to create...
Hello everybody
I am interested in how you apply a radius to a rectangular body in Solid Work , which should be cut along a curve with a depth of for example 4mm?
Many thanks
Regards
Hello, I just had a look: 2009 exists also with 64 bits
Greetings
Hello everybody,
Just a short question: where exactly are the particular rapid traverse rates of the individual axles positioned in the mac. File?
..or are they in the gpp file??
Afterwards,...
Here a link for everybody that is interested
http://www.youtube.com/playlist?list=PLEF9...mp;feature=plcp
Hello,
I read about AFC of Haidenhain.
My question: what is essential if we'd like to activate this in our company:
1. actual software version of iTNC530?? - when did this function started
2....
Hello,
we would like to put together a program on our Chiron FZ15, which is too big for the memory.
There might be a possibility to run this program through an external hard drive.
Unfortunately...
Hello…
Ok, it would’ve work… I saved it as a drawing template *.drwdot…
Or is there another possibility??
Thanks guys
Greetings
Hello
We’ve got a standard drawing template with the extension *.frm for our ProE CAD program. I’d like to apply this template in SolidWorks. Therefore I need another format that can’t be saved in...
Hallo
I use CYCL DEF 32 for tolerance… one can enter a value there…
Deselect it at the end and enter 0.01. Otherwise the machine will buck the whole time.
Byyyyyye
Well, it certainly also works with M112 and M113…
But isn’t there a cycle therefore?
Hello people
I’m looking for a honing cycle…
I’ve got a 3D chamfer that looks very choppy…
There’s a wear or honing cycle for iTNC 530, isn’t it????
Does anybody happen to know how it’s...
Well…
I found it…
Oh-oh…
I believe to have a really difficult question..
I can’t find the online help again…
Could anybody describe the way to it (but I don’t mean tutorials of SolidWorks)?
Thanks thanks...
Hello everybody!
I’d like to know when how and where you apply choice filter in SW.
Thanks
Merry Christmas!
Regards
Hmmm… I’ll try…
But I read that it also works with help of the button “distribute elements”…