Thanks for the response guys but I figured it out soon after I posted there is a simultaneus drill mode in mazatrol it allows you to put in spindle speeds for both the main spindle and the mill...
Type: Posts; User: the mill kid
Thanks for the response guys but I figured it out soon after I posted there is a simultaneus drill mode in mazatrol it allows you to put in spindle speeds for both the main spindle and the mill...
Hey there guys, Im running a mazak 350 m lathe with live tooling and im trying to run both the mill spindle and the main spindle (in opposite directions) at the same time anyone ever try it. I've...
Hey guys, need some help mazatrol milling is my weak spot and im just trying to do a simple straight keyway on a mazak 350 lathe with a matrix control and with no Y. The endmill is to size and i just...
Hey guys been awhile, I am running a Mazak 350 Nexus lathe with a Fusion control running an eia program to do some o.d. milling. I am cutting some slots using the vertical mill spindle 16 times...
Awesome thanks jim, about 5 minutes after I read this my boss called me with an email from mazak(finally) confirming rb1 can't wait to get to work to try it! Greatly appreciated.
Dana
Hi there I am looking for a manual process for a bar pull program using mazatrol to compare too. I have done them before but it has been a while. I am on a mazak qtn 350 nexus lathe with a matrix...
Hello, I was wondering if anybody new the parameter for the open and close chuck option on a mazak qt 350 lathe with matrix control. I'm trying to do a bar pull program with m code 206 to open and...
you could also try drilling a hole at the plunge point and start your endmill in that hole.
is your feedrate cut in half on the ramping? also are you running a rough and finish endmill, if so you can use an endmill a little smaller than the width of your slot and do a helical move down to...
I have never really had a problem with work hardening while milling, sometimes this can occur when drilling at to low a feedrate, but i'm sure if your running to high an rpm and a slow feedrate some...
Hey There,
not sure about your machine but I have cut plenty of 316 on a verticall mill and maybe I can give you a good starting point. With a hss endmill I would start between 70 to 100 sfpm. so...
I'm just going to throw you a couple of names I don't have all the specs and I am more of a mazak guy but in my travels I have talked to many and found that Haas makes the best machine for the money...
We use Blaser 2000 works great keep the concentration around 9 to keep it from going rancid if you run into a foaming issue use calcium acetate dissolved in a 5 gallon bucket of water. poke a hole in...
I don't think I have ever met a programmer who hasn't first started out as a machinist. Machining knowledge is a huge plus when it comes to understanding tooling and processes. Sure you could learn...
Get griffo bros to save all your mazatrol programs you can hook it up through the rs 232 port and you can also view and do edits to you mazatrol programs offline!
So if I have a 0 in bit 7 and in my cam software program with cutter comp. the program shifts half the dia. of the cutter, then I can use the tool offset page with small increments, wich is what I...
I am currently trying to do some complex milling on the face of a part using edgecam software. I have been able to get through the program only problem I seem to be having is with the cutter comp, it...
I have done a lot of turning and milling ti we are running 200 sfpm with a .012 feedrate and a .100 depth of cut on our lathes. Kennametal makes a great ti insert the grade is 5025 or 5525 one is for...
Just wanted to say a quick hello to all. My name is Dana and I have been cnc machining for 15 years, mostly Mazak lathes, and I am currently running a 4 axis nexus 510 miller. I do all my own...