thanks for info.
sadly they are not that advanced as the Heidenhain controller - Haas sponsors our training college with cnc machines and the controllers are just the basic kind.
P.S
would...
Type: Posts; User: anilam
thanks for info.
sadly they are not that advanced as the Heidenhain controller - Haas sponsors our training college with cnc machines and the controllers are just the basic kind.
P.S
would...
Hi everyone - old thread, but hopefully I can get some guidance with a probe measuring issue as I have searched the internet but have not found anything useful relating to Haas part measuring with a...
I'll pm you on monday when I'm back at work.
the post is old and written for PM7
Hi guys
as luck would have it the Hdd on our 6000m cnc machine packed up. So I need to reinstall the cnc software but disk 2/2 is corrupt!
where can I get or download disk 1 & 2?
thanks...
right so my anilam 6000m controlled cnc machine just froze. I rebooted and it did not reboot the normal way, but went straight to the axis position screen.
the key board is non responsive - so is...
hi guys
anyone know how to setup the m1000 "continuous path" code?
thanks
Ok sorted - seems you must have a "zero" tool otherwise it gets confused with itself
Morning guys,
so yesterday I had an issue with the tool changer resulting in the ATC losing it's orientation - eg. tool numbers no longer correspond.
called a local service tech and he said I...
if anyone is interested I have a post for a fanuc18i MB - in the old *.opt format
yes very useful! go troll somewhere else!
I need the drilling cycles changed to suite a fanuc 18iMB controller.
I need the G05 P10000 code removed from the 2d drilling toolpaths, but not from the 3d toolpaths
I need some info in the...
I'm still using PM7 with the old opt post and I need to modify it - is anyone here familiar with the old option file?
right here is the macro's I wrote over a year ago.
this is specific to my application and setup which is milling PET molds out of 7075 aluminium.
these macros measure & mill the block to size...
Hi,
yes we got the HSC with the Heidenhain controller - freaking awesome!!
I must post the parametric pgm I wrote for it to mill a block square and measure it.
hi guys,
I'm sitting with a similar problem. got an old small megamill with an anilam 5000m controller. this machine worked fine 6yrs ago but due to rolling blacks outs back then it died on us and...
Hi guys - although not new to this forum just never found the time to write about myself.
got my first taste of cnc & computers back in 1980 while at tech and after 2yr military service I started...
Hi guys anyone here have experience in the above controller on a DMG HSC 75 linear 5 axis?
I looking for a macro to square up some aluminium blocks for a production run.
thanks
Hi guys
anyone working with or have experience with the above machine? would like to know what I'm getting into :)
regards
anilam
thanks, I've solved the problem.
I need to design a sheet metal rolling machine to form side panels for a solar water heater panel box, not having done this before I'm in the dark, so I'm looking for info regarding the build of this...
thanks Larry
will this post work from inside powermill8?
looking for post processor for an old maho 1000 mill & pm8. the Y & Z cords are swapped around!
or is there a way I can modify an existing post to swap the Y & Z?
regards
anilam
I've used powermill for many years now and have shown on many occasions that it can out perform any other cam program when generating toolpaths. had it running against edgecam once and proved to the...
Hi guys
urgently looking for a Featurecam post processor for the Kia KIT450 cnc lathe with a Fanuc series oi -TC controller?
the PP must support upper & lower turrets.
or maybe someone can...
thanx I will take a look, although the "dry run" button on the control panel is off
its a good idea to set it slow.
thanx MysticMonkey I will look into it.
guys I'm not cutting at F5000.0. I rapid down to G0Z5.0 - then from there I drop down to G1Z-9.8F5000.0.
NOW I start my cutting down to G1Z-18.0F130.0. even so it still ignore's the G1 codes...
no that's not it. it does not read the G01 at all, so it starts cutting at RAPID eg. G0!
no matter what the G01 feed is? the next line is set at G01 F130.0 it does this at G0!! and carries on...
sorry my post was delayed - great thanks will get the techie to check it out. I don't know how to access the parameters.
One more thing I want to ask and that is when I have ran a pgm and then...
yes the EOB r all there.
if u go into the "quick nc" function u can allocate M02 or M30 to trigger the counter.
if u go into the "settings" u can only fill in "parts required" and then zero the...