All the information you need to run my tool is in the readme, clearly visible on the main page of the repo. If you don't know how to run command line utilities you should contact your IT dept.
Type: Posts; User: Metrologist
All the information you need to run my tool is in the readme, clearly visible on the main page of the repo. If you don't know how to run command line utilities you should contact your IT dept.
Bob,
General forum etiquette is to create a new thread for your issue instead of hijacking an existing one. You don't provide enough information here to help you. So when you do make a new...
The problem isn't .NET it's the network connection. The execution of your .NET code is going to be faster than a network response by an order of magnitude. So you should be asking yourself about the...
The software you are looking for is called https://en.wikipedia.org/wiki/Product_data_management
This allows you to not only perform version control of your CNC programs but it also links the...
You cannot connect old HAAS machines to a Linux SAMBA client. I have tried everything. They speak an old, quite insecure, version of SMBv1 that just doesn't exist anymore and was never compliant with...
@Schtritzpog, the easiest method is to use a USB DNC Server. I've been using TITAN RS232 to USB CNC DNC server for a few years now. It's easy enough for the operators and it is reliable. I did have...
I use this one to split out the individual programs. It is open source and it's really short. You can easily read the whole thing quickly. It has no external dependencies. It's 100% C#. ...
If you aren't comfortable running a random executable posted to a forum without source take a look at this project. This one is open source and it's really short. You can easily read the whole thing...
I am using DPRNT to FTP on multiple FANUC controllers from different manufacturers. They are all fairly similar. I have one that is giving me this nebulous error "E-0522 [-1]” near the end of the...
On my Pro5 control the settings page are unlocked for editing with password PRO
There are multiple "settings" or "parameters". Can you clarify which page you are on? Is it in the Pro5 side or the...
I have used FTP client from the machine to an external FTP server. Set up an FTP server with static IP, username, and password. Must be plain old FTP.
On the 0i controller:
Configure FANUC...
Every time you PCLOS it makes a new file. To keep your subcall process you would remove POPEN and PCLOS from the sub and move it outside the loop.
POPEN
WHILE [your condition is true] DO1
M98...
It works with the DataServer. Have you tried using the DataServer?
Some CNC machines with a USB port can be driven from a regular keyboard. Some barcode scanners present as a USB keyboard. If both of these are true you can plug the scanner directly in to the CNC...
Better late than never?
1. There is no username or password for the telnet connection on a Haas machine. Leave both blank.
2. That is not the way to issue Q commands. The telnet interface will...
This is a really cool project. There are a couple of things you can do to mitigate the concerns expressed in this thread.
First, you can install real-time kernel extensions or just start with an...
Thanks,
Seems like a more official answer when it comes from a guy named "haastec"
Always make backups of everything. Post processors can be expensive.
Is there a way to write/delete/rename/copy/move files from machine memory programmatically?
For example:
If a file is in the netshare can you move/copy it in to machine memory, run it, and...
Looks like their old legacy site is browsable. Dig around in here:
Index of /sites/www.3dsystems.com/files/legacy/techsupport/software/
Your best bet would be to stop using that old hardware. If you can get all of your data out of that hard drive you can run it in any modern DOS system like FreeDOS. Make backups of everything!
...
The tolerance is pretty huge for most parts of that assembly. Are you sure there are machined parts in there? Couldn't it be drop forged in bulk?
Can you verify communications with a program like Hyperterminal pointed at that port? (Just to prove that command\response on that port is functioning)
What software are you using to communicate...
There is some information about your tools in the offsets variables. Poke around in there to see if you can extrapolate the information you need. Getting that data out to a file will depend upon your...
This is how networking functions inside any Hypervisor, like an ESX host. It's a buzzword for virtual networks. VLAN is technically "Software Defined Networking" and the same is true of assigning...
Sounds like you need to troubleshoot every single part of this system. Does the USB adapter work? Can you push/pull through it using another application like HyperTerminal? Once you prove it works...
This tape drive emulator could be used by any machine that uses this kind of tape reader. I feel like this hardware/software solution should be shared outside of just FANUC 6
I would caution against using wireless for DNC due to the potential of connection loss during transmission.
At the very least you need to do a wireless site survey to look at the existing traffic...
There are 2 problems with wineHQ for modelling:
1. There is a huge performance drop due to the overhead of emulating windows graphics stacks like DirectX. (Read: Bad for 3D applications)
2....