Search:

Hi, you got the price of the Datron machines? Impossible for me to get them.

Hi Richaevans,

In my retrofit I did use a 1Hp Variable Frequency Drive Inverter, you can find them on e-bay as low as $50 sometimes, in my case the drive is 120V to three phase, more common is...

Hi Dee436,

I have not used these "proximity switches" because will work as a encoder with a very low resolution, a average encoder will deliver thousands of pulses x revolution, this one will...

I have retrofitted two EMCO's with Gechodrive G540 and 280oz stepper motors, if you are new in CNC or have not worked with a serious machine you will be very happy with. Max rapid ( without lose...

May be the drawbar/retention mechanism cause it, it use steel spheres, dry grease may locate them in different position causing disballance, once the tool is in position all them keep the same...

Hi to all,
Please I would know the price of the HAAS OM 1a or the HAAS OM 2a in the United States, the most basic configuration - 3 axis and ATC - no 4th axis or CAD CAM software.
Best regards,...

Hello Madog,

I also have a pc mill 50 without software and PC. ¿How you has done with your machine?

I do not know if the original software and hardware will work better than a Mach3 software...

Thanks for your answer Lanb,
Only a extra question, the axis use stepper motors? Or use the same motors of the EMCO F1 with the old technology. I am using a EMCO F1 for to make camera parts, I have...

A help please,
I have the possibility of aquire a EMCO Pc Mill 50, seem as new but the RS485 card, software and computer is missing. I would retrofit it as I have done with a EMCO F1, with new...

Hello,
I have a F1 which I have removed all the electronic parts and added a new life with new stepper motors, drivers, etc and work very well with Mach2 or Mach3 software. I make very complex...

Hello,
I have bought one of these drivers, are easy to install and well constructed. The only problem if can be called in that manner is than the seller offer 2.5Amp as output, but my 282 Oz/inch...

Hello CR,
In the holding positions the current is 0.3Amp, during the acceleration i get 0.4 to 0.5, making force by hand at F150 mm/min ( 6 inch/min ) 0.36Amp, forcing the motor reaching the axis...

Hello Fiero,
I have bought a Mechatronics to the e-bay seller autohec I have the same problem in my EMCO F1 mill, I can't go more beyond of 240mm/min on G0, then I have increased the voltage from 24...