Hi all,
I am seeing a lot of surface quality issues on my AvidCNC machine. Using a .5 ball end mill with a .025 step over at 170ipm. I will attach a picture as an example.
We have the AvidCNC...
Type: Posts; User: MicFarlow
Hi all,
I am seeing a lot of surface quality issues on my AvidCNC machine. Using a .5 ball end mill with a .025 step over at 170ipm. I will attach a picture as an example.
We have the AvidCNC...
Hi All,
I have had this machine running for years. I bought it when Avid was still CNCRouterParts. It is based on the LeadShine MX4660 with Nema 23 Servo's and I have the Pepperl and Fuch's...
so... an observation.... these steppers have a gear reduction of 29:1... that seems excessive to me. the Avid 960oz Nema 34's work just fine with a 3.2:1 ratio...
I would think changing the gear...
How about this stepper motor from Avid... will it work with these 60v drivers?
https://www.avidcnc.com/960-oz-in-nema-34-motor-p-112.html
At 2mh the inductance is quite low and 960oz should be...
You are indeed correct... The steppers in question are Wantai 85BYGH450C-060 motors... they are 151mm length 1,700 oz motors driven with 60v power supplies. The easiest thing for me to do would be to...
Ok... so I actually misspoke.. I have steppers, not servos! My sincerest apologies about that!
So.. They have 60v power supplies and I have measure them all to make sure they are at 60v and they...
I have no clue to be honest. Is that a setting in Mach3?
Quick followup... I just double checked and I was incorrect about the slave axis slowing down after a few inches... they both do it... and in both directions.. there is no set way that it happens....
Hi All,
So I started a new job and as a part of that I have inherited the duties of fixing thier existing CNC machine. Having built my own 4x4 Avid/Mach3 machine I am not a complete newbie but...