Probe or Tool Sensor?
There is a wealth of information at https://planet-cnc.com/blog/?category=obsolete. I use the Lower (-) Z limit. The Tool Sensor I have, has the probe switch and an...
Type: Posts; User: david_s5
Probe or Tool Sensor?
There is a wealth of information at https://planet-cnc.com/blog/?category=obsolete. I use the Lower (-) Z limit. The Tool Sensor I have, has the probe switch and an...
Here are some pictures. I did not take the controller apart, I printed the case, in sections.
On the wall the 2 black boxes that are to the upper right of the motor controller are the real RPM...
Hi Berin,
I added a consew clone to my taig, and ended up re-rewriting the FW on the STM8 to do PWM to V curve adjusted to the isolated V-V converter I bought. I also added an RPM sensor, but...
Berin - You Rock! I now have PWM and VSO working. On to wiring in a Servo motor!
Thank you so very much.
If I can hep you trouble shoot the 4 Axis HW let me know.
It is never simple :(
What happens if you visit https://www.st.com/content/st_com/en.html and click login first?
Hi Berin
Awesome!
What is not working is the PWM and VSO on connector N).
I have the SWITCH G) to the TOP and the SW configured to use OUT3. I can see the signal on the ST8 pin 24 (PC7...
berin,
I have this controller but the stm8s903k3t6c was left not programmed. Do you have a ST-link that you can read the programs and EEPROM data out and post the hex file?