http://www.homedepot.com/webapp/wcs/stores/servlet/ContentView?pn=BP_Sika&langId=-1&storeId=10051&catalogId=10053
Type: Posts; User: gsrmmeza
http://www.homedepot.com/webapp/wcs/stores/servlet/ContentView?pn=BP_Sika&langId=-1&storeId=10051&catalogId=10053
The "Q" is the size of the peck.
Ex: G83X0Y0Z-.1R.1Q.1F20.P.01
This will do a peck of .1
Ex: G83X0Y0Z-.1R.1Q.2F20.P.01
This will do a peck of .2
Albrecht, Inc.
Attention: Rebuild Dept.
200 Oser Ave.
Hauppauge, NY 11788
:banana:
These are similar but I think you could make them yourself and save alot of money.
http://www1.mscdirect.com/CGI/GSDRVSM?PACACHE=000000118384345
...
This is correct.
The pitch is 1 inch divided by the number of threads.
So 1 divided by 56 threads per inch equals .017857
This should be 1000 RPM x .017857 = Feed 17.857
Have you thought about laser.
http://www.epiloglaser.com/glass_engraving.htm
Yes you can mirror a fixture in Format 1. Here's a WARNING for you if you use mirror imaging on a Fadal!
Do not start on the cursor line if you need to do a mid program start. You want to do the...
The tools belong to Fadal. They were doing a PM on the machine and the table needed to be recut so they did it. The back center of the table was Z0, the front right was Z-.0055, the front left was...
I hope this works. Here are the videos of the table being cut and the table being scraped/scollaped.
YouTube - Fadal Table Facing
YouTube - Fadal Table Scraping
The shop where I work had a machine table recut and it takes 2 special tools. The first is a 8 inch fly cutter and the second is the tool for putting in the scales. The fly cutter has 1 round insert...
Why are you removing the Block Skip character. All you would need to do is flip the Block Skip switch. Can you post a copy of your program and a pic of the part. Is the insert a Heli-Coil or some...
Try Block Skip.
Fadal's have a standard memory capacity of 40k. You will need to get expanded memory or DNC your program.
Here's a better link
http://www.usshoptools.com/current_year/Toolholders/kingston_spintru_main_060208.asp
They are after the Cat 40 and Cat 50 holders.
You will need to search a little.
us shop tools carries bt-35 holders
http://www.usshoptools.com/current_year/all_products/2007_08_pdf/PGS_185.pdf
Try MSC. I just bought some from them.
Have you heard the saying? " Stepped over a dollar to pick up a dime!"
You say shops offered to make your parts for $800-$2500.
1: you bought a Bridgeport mill
2: you bought an indexable...
This is a link to Rutland Tool. It is a combined drill countersink. The tool is a number 4 1/2 which is a 3/8 diameter shank. The drill part of the tip is 9/64. The angle is 82 degree. I hope this...
HAAS gives them to you for free with the purchase of a new CNC.
The shop where I work uses this outfit. We use the Huntington beach location. They do have a location in Michigan.
Novi, MI 866-362-0699
...
http://www.mag-ias.com/index.php?id=tradeshows
We have Gast vacuums where I work!
http://www.gastmfg.com/pdf/rotvane/23_series.pdf
Tool Setting
1) Install tool in the spindle.
2) Press the MANUAL key to enter the command mode.
3) Press the JOG key to enter the jog mode.
4) Jog the Z axis until the tool is in the proper...
I don't know anything about punch presses but I did Google "pitch 147 amada"
and came up with this. Look at page 2.
www.amada.com/support/service/file_get.asp?file_id=15971
When the coolant gets a little ripe where I work we add some baking soda. After a few days there is no odor and it also neutralizes the acidicness that the bacteria may have created.
I would use a thread forming tap for the .500 depth but if you really want to use a cut tap I would go with the high performance tap made by Greenfield. The only problem with that is they cost $16.74...
I use anti sieze on the retension knobs at work. It doesn't hurt anything to use it. If your cat 40 and retension knob rust you will have a problem getting them apart. I also use a torque wrench to...
MSC has porting tools in their catalog. You can look them up on their web site also. The tools they have are made by Scientific Cutting Tools. Here's a link:
http://www.sct-usa.com/main.asp
We just bought a tapping head 2 weeks ago. It is made by Collis and costs $186.34 We are currently using it in stainless cutting a M6 x 1. So far its working great. The range is #0-9/16" Hand, 1/16"...
We just had our spindle repaired. It came back yesterday ( Tuesday ). It is still in the box waiting to go into the machine. The place that rebuilt it is in Huntington Beach California. However they...