Hi Peter, pls send me the e-mail: [email protected] will send you the file
Type: Posts; User: ArgusLaser
Hi Peter, pls send me the e-mail: [email protected] will send you the file
Hi Peter,
This old control system from 2010 has been obsolete for a long time, but I am glad to see the equipment moving.
If you need assistance with this device, and manual book for this...
The silhouette machine is a kind of DIY type machine, slow speed with low production range. The advantage is small, cheap and clean.
Laser Cutter has plotter type and galvo type. The plotter type...
ARGUS LASER has been manufacturing laser equipment since 1998.
We have wide products range which including:
1. CO2 Laser Engraving&Cutting Machine
2. CO2/Fiber/UV/Green Laser Marking Machine
3....
are you from Candy Rush?
Last year I have received the inquiry, made the sample, and forward to our UK partner.
hihi, guess I'm too late to enter this topic :P
Hello Michael,
Good day!
This is Eric, Overseas Sales Manager from Sunic Laser (ARGUS)
Thanks for your concern about our laser equipment.
About your question, I think you'd better find out...
Hello my friend,
This is Eric, Overseas Sales Manager from Sunic Laser(ARGUS LASER). we are specialized in manufacturing laser equipment since 1998.
We are professional in the paper laser...
A good laser cut invitation card design will be much more complicate than the designs in your picture. And once you use your present 40watts laser machine to make the laser cut invitation cards, you...
I have no comment on them, but maybe here below links may offer you some reference.
http://www.cnczone.com/forums/general-laser-engraving-cutting-machine-discussion/297196-forum.html
http://www.cnczone.com/forums/attachment.php?attachmentid=347322&stc=1
Argus Laser is the leading laser equipment manufactuer in China since 1997, which is located in Chinese Optical Valley, Wuhan...
Dear Rick,
Sorry to say that if your tube's gas is lossing, you can do nothing now.
As I said, before it happend, you should use low power like 10% to active the gs molecule first for around 10...
hello Rick, sorry to hear that.
Even though you never used the tube, it doesn't means the tube could be as new as one year ago. in fact, the power of the tube will fade still. And if you didn't...
you can see the light it means the power supply have no problem.
The light only appear in the anode side, but can not reach to the cathode, that means the gas inside is losing, resistance is...
My advice,
Please treat it as you just pay 250-300USD to buy a toy, don't think too much, you will feel better.
It is just worth that, don't think it can be a goose with the golden eggs.:devious:
Like this?347064
From your tube picture I can not tell anything my friend. These pictures just can prove that the tube is not break.
If the lens of the laser tube is crack or the sealing of the laser tube has problem, the gas can run out of the tube.
Long time use 130W for engraving, or the lens of the tube is polluted, can both...
Dear Rick,
please check if you can see the light inside the tube or not. if you can see the light, but no laser comes out, that is may caused by overload, normally output current should not over...
Dear TenGauge
Don't know where did you get the machine, if it is from China, there are three parameters will affect your engraving depth.
Laser Power: Bigger power, engrave deeper
Marking...
Dear Gshimer,
The laser beam of 180W tube is bigger than that of the 100W, you need use the 25.4mm diameter focal lens.
Warm regards
Eric
Dear SignWave,
Equipment manufacturer or laser tube agent plays a very important role to service for the client, the client's using experience has deep relationship with that. Generally, if you...
If ballscrew has bigger diameter, will be better, cost will be higher. Normally, for the 1290-1490 model range, we will use φ16.
If you go for belt drive, stepper motor will be enough. Belt...
Dear SignWave
I like your black humor, but very professional comments.
Very sorry for your bad experiences, it was your supplier's lost to lose such a professional client who can handle the...
1. be sure if your model space is enough to put the higher power tube before you upgrading.
2. Their price keeps some profit, but it is still in reasonable range.
3. The most important thing is...
1. We have made the test, 400W Servo Motor can reach to 300mm/s, 750W Servo Motor can reach to 600mm/s.
But, if you use ballscrew to run as such high speed, it has high requirement for the...