Hello, Jorge
I have a couple of Epoxy Granite Machine Bases that were made by Intelitek for their Benchman and Prolight machines. The machines were designed for small prototype parts and for...
Type: Posts; User: hydropro
Hello, Jorge
I have a couple of Epoxy Granite Machine Bases that were made by Intelitek for their Benchman and Prolight machines. The machines were designed for small prototype parts and for...
I would purchase it for that price. I have a manual Wabeco mill and paid a lot more for it.
The quantity needed of each part is below.
QTY. PART NO. DESCRIPTION
1 549806 BRACKET, Y CYLINDER LENS
1 549807 MOUNT, CYLINDER LENS, 22 x 20
1 549810 CLAMP,...
Hello I need a quote for the attached prints ASAP. The 416SS components will need to be hardened and ground per instructions on the prints. The steel and aluminum parts will need plating and...
you can try using a calibration standard used for calibrating 1-2” micrometers but I’m not sure if the are certified.
I have designed a drag knife that may be perfect for your needs and it is called the “Route-A-Blade". It is based around the X Acto style knife blades which are available in many different profiles...
Please visit ebay ad.
TMC1000 CNC Milling Machine Like Taig Sherline Minitech Emco Tormach Wabeco | eBay
There is a Prolight 2000 CNC Milling machine on Ebay equipped with a high speed spindle that will do the job. Its servo driving, but may need to be upgraded with new electronics. The machine has a...
Good quality 135deg Cobalt drill bits and slow spindle speeds work best for me when drilling stainless steel. Good luck;)
check out this one from Northerntool.com it should be large enough for your parts Shop Tuff 1.25 Cu. Ft. Vibratory Deburring and Finishing Tumbler, Model# STF-18VT | Vibratory Tumblers| Northern Tool...
Contact Jim Fleig, at [email protected] he's a CNC Field Service Engineer with over 20+ years experience and is located in Rochester, NY. tell him Jose Santini recommended his services.
Please send files to [email protected] Thanks in advance.
Jose Santini
How many do you need! I make my own cables for the powermax II motors. What length do you need, and do you want them to run in series or bipolar configuration. You can contact me at...
Check out this link for good examples CNCCookbook: The Enclosure Zoo
Great! I wont be needing the tool holders right away and will wait untill they are avaliable through Hubbard CNC. Will the price for the holders still be $59.00 on Hubbards site?
Regards, Jose
woohoo! I'm ready! I would like to purchase two sets but we just purchased a new home and I'm in the process of setting up my new basement work shop. Hopefully you"ll do another run in the future;)....
The measurements are impressive. I can't wait to get mine!!:banana: This spindle is going to fit perfectly on the Mini VMC I plan on building in the near future. Thanks, for saving me the trouble of...
The Super Prolight 1000 is about 30k new, and is a high quality machine. I'm not sure about the ExpertMill VMC-0600 price, but I think it's less than the prolight 1000. I have a Prolight 1000,...
I would reccomend a "Super Prolight 1000" or a "ExpertMill VMC 0600" from Intelitek Corp.
I have a Prolight 1000 CNC Mill that originally had a Baldor 7500rpm 1hp 90vdc motor and was geared down to 4700rpm max at the spindle. The motor would get very warm after an hour or so of use. I...
Sorry, but they were purchased over a year ago. You just have to be patient with ebay and every now and again you'll find really great bargains.
Regards,
Jose
I have upgraded my Prolight 1000 spindle motor to an .8hp Pacific Scientific AC brushless servo motor and drive, both purchased from ebay as new/old stock. The motor runs very quitely and with good...
I had this problem before and it had to do with the stepper motor coupling coming loose. Remove the stepper and check the motor coupling. It should be a easy fix.
I'm using Intelligent Motion IM483 Micro stepping drivers with 200oz Pacific Scientific Powermax II motors and a 40v 10a unregulated power supply on my Taig Mill and my rapid speed are a consistant...
post some pictures of the unit. How much are you asking?
Can you post some pictures of your minitech 2 mill with the maxnc spindle mounted. I have purchased an older (first) model minitech mill that also came with a mount for a foredom flex shaft spindle...