You are asking a lot for that little tool. Slow your feed rate down you are way to fast, cut it in half. Do multiple passers. I use a 4mm up down cut in 1 pass on 12mm plywood at feed rate of 50mm...
Type: Posts; User: andus
You are asking a lot for that little tool. Slow your feed rate down you are way to fast, cut it in half. Do multiple passers. I use a 4mm up down cut in 1 pass on 12mm plywood at feed rate of 50mm...
Hi not sure what you are after but click add in the shape editor to hollow out the spoon. Hope that helps.
Hi Drillman on Ebay has some good quality bits that are cheap and last. Andus
Hi Ralphie1 Sounds like your wiring is wrong to your power supply. Check to make sure it is yellow, red, black in your first port and in second starting from left to right from the 3 hole yellow,...
WOW some of the best work I have seen, rephase that, it is the best work I have seen. The most realistic faces. Very Very nice.
Thanks for the info Rob
Hi
Does anyone out there use NC Studio and Artcam, (original) with a Chinese machine. I have it set on CantechRMS mm (*.cnc) , cuts alright but there is a big time difference in machining time...
Hi Cyruss
I have a XJ6090 from Jinan XYZ-Tech CNC Equipment Co LTD. I am not sure if it is the same company, that your machine is from. I have an instruction manual for my machine which is...
When I create typeart object and click on the "section icon" it shows the engraving ABOVE the material (z+) rather than IN the material. Then when I create a toolpath and try to machine it I get an...
Thanks for that. Can't open the CADFamily link. The NC studio manual is the same as the one we have and it is not easy to understand.
javie
If you still need help, you set the machine up in ISO ISEL ,add that as your machine and see how it goes. have fun
Thank you for your help roctech
Hi Yes my supplier gave me a copy of the manual but it is hard to understand and the dongle is yellow and it has pro, type edit on it and some numbers with aladdin.com patented
Hi Roctech
The software is type3, [4.3.0.0] [2] simplified Chinese version and NcStudioV5.5.60.0
Thanks
We have just purchased our first CNC router from China. It came with Type3 v 4.3 CAD/CAM and NCstudio v5.5.6 controller software. The manuals they provided are hard to understand. Does anyone have...