Got it fixed, the keypad moved & kept the PG/DN key pressed in.
Type: Posts; User: duenow
Got it fixed, the keypad moved & kept the PG/DN key pressed in.
The screen just keeps flashing & the program just keeps going on & on. In
program edit it stops
I can curser down but will not page down it will page up after I line
by line go down.
In auto...
I have been using the Iscar Doogrip DGFH 32-2 for years I had to mill off the bottom to get 1/2". Works I also bought the .122 insert blade DGFH 32-3 the inserts last a long time double end & I...
I bought 3 from him 2 yrs ago, I put in my XP computer, 1 in my HAAS & 1 for an extra. They work fine if you can use the 1.44 file size, have 100 floppy's on a USB stick.
That green stuff is Anchorlube I still have 6 little bottles of it, great stuff.
I can't help on that but Hardinge sure messed up turning it over to them.
I have bought many Hardinge machine tools CNC & others but not anymore.
Is Andy not there anymore, I bought my mini mill from him in 2004.
I don't know about all this doom & gloom on the CHNC's. I bought in 1992 a new CHNC I & it's still running 8 hours a day now & will still hold .0003. Oil only since day 1. The thing about oil is you...
Correct, after 12 yrs on my bought new CHNCI that started, a new turret o-ring kit fixed it. Lots of seals & rings in that kit.
Grind a small X over the burn marks with a thin cutoff wheel , then use lipstick. I've been doing this for 35 years for all my screw machines.
Does not work on my ver 13.03. the setting 23 was already off, went to list programs mode then posit & no f2 F3 there.
Very hard to find in the manual, but your help worked.
On Haas mini mill 2004 with the floppy drive, before my battery goes out.
I don't run it once every 2 months I bought it new so would like to get this done.
Thanks
Just call Hardinge
Your web page ain't working all day today, Monday
That is why I hide all the 3 jaw chucks that come on my machines & I forgot where I put them <G>. Only 5C & 16C collets, I don't do any work over 1 5/8".
Now I do have engine lathes with big 3 jaw...
Problem, they last forever. Running my 1992 CHNCI I bought new. still will hold .0002. Also love the safe index & use it on my other fanuc lathes..
Well with subs set to Ignore All it works 1 min 12 seconds just like you got.
Subs are these:
&HE:%
:0001
G01G40G97G98F400.
M98P10999
M99
%
Strange thing is the mill part is right on in cycle time. & notice you with the same program says "Total feed length" = 5.73852 & mine says 14.0097.
I have un-installed the program & deleted the...
The regular mini mill 6,000 rpm will cut SS just fine I have a 2004 mini I bought new.
You just take lighter cuts than if it was a Mori. One thing I bought & you
should is the high volume coolant...
Yep, the damn cold & heating bills are causing people to not be able to make their house payment, hmm
About my time cycle?
"To the other person who mentioned getting a top for the Mini, I just wonder why? I have been running ours for the last 2 years, using the high volume coolant pump, and haven't had any problems with...
the one way valves from Loc-Line do cut down the flow & do plug up & quit working as well.
I put a 1/2" locline on my mini with a big Vee.
now that is strange here is what I get. What's wrong running XT
http://i267.photobucket.com/albums/ii305/dobedave/Haas/178N.jpg
Ok, says cycle time is 37M 19S, it's 1M 14S
&HE:%
:0178
G20
G65P9150H1.(SET FOR 50-90-PSI)
(BELMED)
(P/N A-70-000-12 JOB->O178N)
N2(-FEED-STOCK-T0200)
G97
That fixed it Scott. The lathe time cycle is still way off gives a 34M time on a job that is less than 1m. But that's ok I can do without that. The mill time cycle is right on.
Sorry image didn't work, try again.
http://i267.photobucket.com/albums/ii305/dobedave/Haas/fanuc.jpg
In V2.03 loading a Fanuc lathe program the way the machine sends it back would load it in text & run fine one line as one line.
V2.04 only loads it all jumbled together & will not run.
<a...
If you have to run at 100 something is wrong with your machine or your feed.