Hi peloflex
in the first place thanks to Tom for your efforts with the drivers, but I have the same problem with signed drivers and win 64, to solve it i do this:
- goes to accessories --> run...
Type: Posts; User: tessen
Hi peloflex
in the first place thanks to Tom for your efforts with the drivers, but I have the same problem with signed drivers and win 64, to solve it i do this:
- goes to accessories --> run...
the promised video
G96 CSS (constant speed surface) with kmotioncnc & Kflop board - YouTube
thanks Tom!
Hi Tom
the CSS works properly, i'll record a video and upload to show it
best regards!
Hi Tom!
thanks you sooooo much! i can´t try it yet, i hope in a few days i´ll try it and report the result :cheers:
thank again, the kflop board is marvelous but the support for this product is...
Hi Tom!
the toolchanger running, the video i had promised
http://www.youtube.com/watch?v=1_aKIQh37AY&feature=youtu.be
Hi Tom
CSS and threading i think are basic function for a lathe cnc, would be great get it.
yes, now when i make a program i do using radius instead of diameter (but i would like to program using...
Hi Tom
thanks to you, the spindle speed control works properly but, i would like to know how can i limit the max rpm and how to use the CSS function (G96)
thanks a lot for you efforts and your...
Hi Tom
i try to run your program, but not works yet, i don't know that i´m doing wrong
this is my config
M6 (Extecute prog)-->Thread 2 -->VAR 0 --> C file=ToolM6TrigService.c
in thread 1 i...
Hi, Tom i have put a SN74LS04J to convert 3.3v to 5v, i have set up the channel 6, i use the IO40 OutputMode = Step Dir and OutputChan0=22 (Open Collector - Quadrature) i don´t have oscilloscope but...
Hi Tom
yes, that's right
regards
Hi Tom
currently i don't have any homing sequence, i have to set it manually, for this reason i would like to set the tool position from the external control
Hi Tom
ok, you are right, i forget the closed loop
i´ll try the output mode you mention me and i´ll report how works to know what i should change
best regards
thanks
Hi Tom, thank for your help
from i have tried kmotioncnc i don't want to hear to speak about mach3
the turret axis is the channel 2, to change one tool i have to send 4250 pulses (34000pulses/rev)...
Hi, i´m building a cnc lathe, i have no problem with mechanical part but i´m a begginer with Kflop and C programming, ok, i´ll try to explain that i have and what i would like achieve
the plate...
Hi Tom, thank for your time, i´ll follow your advice, but my principal problem is how config the kflop to obtain the train pulses correctly, and currently i have an encoder working in the shaft of...
Hi Tom
this is the manual of the VFD
http://www.minimex.in/pdf/19%20Frequency%20Inverters/3G3MV%20(Setup%20Manual).pdf
and i´ll try the open collector circuit, like you say
regards
Hi!
i´m building a lathe cnc and i would like control the spindle speed using an VFD (3G3MV) that admit a pulse train input, i suppose i have to use a step/dir generator from kflop but i don´t know...
the first thing you should think about is your expectations about the Cutting process, it is not the same the requeriments if you are a particular user or a company, this will influence the cost of...
Hi, the system is working well, I have not done all the tests but I've cut steel without leaving burrs just in 3 and 5mm
Hi
I built a small cnc cutting table (lineal rail, ballscrew and AC servo on each axis) and I've added a manual plasma torch PowerMax 30, my intention is to cut small thickness about 3-6mm, also i...
Hello
my plasma unit it´s a powermax 30 and excuse my english, I wanted to say that the z-axis moves up and down quickly
I hope to get more quality cuts, these cuts now will not help
thanks
Hi Torchhead you are in the right way, the THC Corrections are set up to work in inches, i fix it as you explained, and now the DRO Z it´s moving!, but i have another problem, when cut a shape...
Hi and excuse my delay to response (last week i was pope of twins)
the THC button is on (blinking), mach 3 are license, the Z DRO if THC is off must be on 1.5mm but if THC is on set up on 1mm (by...
Hi to everyone!
I have a problem and i don´t know how to solve, i hope someone can help me, the problem is as follows:
I installed a THC but can not get the system work, seems to work, but the z...
lamicron estas seguro que la lente tiene que ir con la cara curva (convexa) hacia arriba? yo creo que no es así, yo lo tengo instalado justo al revés, con la cara plana mirando al láser y la convexa...
Muchas Gracias por responder, en principio no tengo intención de cortar chapa de mas de 5mm lo normal sera 2-3mm lo de la cama de agua al ser la maquina pequeña no me sera muy complicado de añadir,...
Hola, pues eso he construido una mini-maquina de corte por plasma con un plasma hypertherm powermax30 ya que como mucho quiero cortar acero de 6mm y este plasma iría sobrado, la mecánica no me ha...
yo tengo un BF-520 y estoy muy satisfecho con el, de todas formas si no me falla la vista creo que por algún lado he visto un "made in Spain" aunque ya me haces dudar
Hello to everybody!
and excuse me, i though there are no post after mine, and cnczone don´t advise me for a new reply, excuses again
at the end i try directly with the computer signal, i know...
thanks a lot, but in the first place i´m trying to control the trigger of the laser, i´m read that mach3 can´t engrave because it have slow signal response i would ask if someone can help me about...