Search:

that is why I bought Endurance lasers

because they tell the truth about their laser power...

I used to have 5.6watt and now I have 10 watt and it works great, cutting 3-4 mm of wood and...

hi all merry xmas I am thinking of buying a lazer cutter anybody got recommendations want to pay under £500 and want to engrave on glass

thank I tried that but it was out of line is this because of the difference between the 6mm bit and the 3 mm bit maybe I should use the same sizes for both cuts ?

hi I just roughed my first 3d design on my with a 6mm end bit cnc 3040 t using artcam and mach3 how do I set the starting point for finishing cut using a 3mm ball nose ? its 200mm w 130mm high 17mm...

thanks m8 im running it through a port with no problems that i can see

had another pc with xp on with all drivers still cant get the x axis to work from the x port can here sound like motor stuck counter moves on mach but cnc don't move but when I plug x axis into a...

thanks russ got windows 7 32bit will try it

thanks russ I have calabrated the steps x set at 10 = 10 y = same and z done a test gcode from mach 3 the scull and crossbones complete size was about3x3 inches my hard drive with all my settings...

I got my x axis working out of the A port on my 3040t as x wont work in its own port its strange as everything configures correctly I made a gcode in vectric aspire 8.5 the size I made it was...

I got a 3040T when plugged in to 'X' Axis to 'X' Port it don't work but if I plug 'X' into 'A' Port its showing in MACH3 as working fine.

Any Ideas what's wrong.. I believe all settings are...