Thank you for your input, discovered that I needed to re-calibrate my axis steps per unit, problem solved.
I looked at F-Engrave and I'm going to try it.
Thanks
Jon
Type: Posts; User: JONLE
Thank you for your input, discovered that I needed to re-calibrate my axis steps per unit, problem solved.
I looked at F-Engrave and I'm going to try it.
Thanks
Jon
Thank you again for the input, Discovered that I needed to re-calibrate my axis steps per unit. Size issue solved.
Thank you again
Jon
Thank you for the reply. I loaded 5" X 10" , file, ran a test cut and it was really small, my dros showed the correct measurements, got me to thinking about possible lead screw-motor problem. I...
Thank you for the input, I discovered that I needed to re-calibrate my axis steps per unit in Mach 3, problem solved. I looked at F-Engrave, going to try it. Again Thanks for the reply.
Jon
Thank you for your reply, going to look at F-Engrave,
Jon
Thank you for your input, will try a scale % in Makercam and check F-Engrave.
Jon
Thank you for your reply,
I have six other reply s to my question, so it will take me a little time to respond back to you with my results. I will load the g-code files into My Mach 3 and run to...
I have six reply's to answer to, so i may not post a reply with my results for a while, I used a simple clip art of a butter fly from: Bing.com/images,
Images of Butterfly Clipatr Black and White....
I though that each program I use in the process of generating g-code when the increments are set to inches would be constantly carried forward to the next part of the process. I converted pixel to...
Thank you for your reply,
I"m not sure where to increase the size by a factor for 5, which program? Makercam?
Thanks Jon
I'm a new cnc router hobbyist trying to learn how to run my diy cnc router with Mach3 cnc program , Inkscape cad and Makercam cam program.
I have an issue with sizing, I use mostly clip art...