Search:

I have had a similar problem on the Leadwell lathe and found the timing belt pulley teeth on the encoder drives were worn. I think this caused the signal to vary which gave rise to the alarm. have...

Hi I am based in Cape Town and have 2 peharka bandsaws, they need to have the hydraulic lift system overhauled. Does anyone have drawings or details that i could use to do the repair. Thanks Don...

Hi some mazak lube systems have jets that have different holes sizes which control the amount of lube, the pump may be able to be set to work for longer or shorter periods. Its better to have a...

8" (BSW) whitworth thread info required.

I need to machine some parts with an eight inch whitworth thread (BSW) can anyone assist with infomation TPI and depth etc

thank you

Don
...

HI
I am machining some large PB1 bronze bearings typical dimension 450mm long 350mm bore 400mm outside diameter.

I have purchsed inside and outside burnishing tooling and would to know if...

I would appreciate some assistance i have purchased a Kitagawa autodex rotary table (type RSO16RAO No 483) with a MacMini controller 900560956 date 94.7.

I require information on how to program...

hi to position a hole accuratly it is advisable to use a centre drill or spotting drill first to a depth of say 3 mm.

The spotting drill usually costs a bit more but the life is much greater....

HI Fran,

thanks for the info, i will try and do some work on the demo version regards Don

I am not sure what you mean by
"ANYBODY even THINKING of getting within a million miles of it risks...

Hi thanks for your input about Dolphin Cad

regards

Don

Hi we have a Fanuc 6tb control, we had an RS232 port connected and use a PC download files. Not sure if the 6t is the same. email me if i can help

Hi I have looking for cad/cam software for sometime and I have downloaded and done some trials with Dolpnin and ShopCam. If anyone is using either of these programs please could you let me have your...

Hi

tool setter not working

I would appreciate any help, we purchased this used cnc machining centre it has been working in a toolroom single shift since +- 1994. Due to bad handling by the...

Hi

thanks for the info I have downloaded the manual and will print out . It looks good and I amsure it will help. my email is [email protected]
thanks for your help cheers Don

:wave: :wave: HI TobyAxis

thanks for the offer, our machine is a Mazak VTC41L, serial number 106296, date 1992-10. It has a YASNAK MX3 CONTROL.

If you are able to post the manuals it would be...

:) HI thanks for the info will try to get hold of Yasnak
cheers
soszi1950
"Talent hits a target that no one else can hit. Genius hits a target that no one else can see.”
Schopenhauer

Hi i have recently purchased a Mazak machining centre with a yasnak control. I would like to find out how to use the automatic tool setter. Can anyone help?

I am preparing a document on the...