Please see attached photo of the switch wiring.
261134
@ Fastest1 - I have tested treadmill DC motor with 12V and 200V (after rectifier) - it was spinning just fine.
@ kreutz - yes it seems...
Type: Posts; User: domu
Please see attached photo of the switch wiring.
261134
@ Fastest1 - I have tested treadmill DC motor with 12V and 200V (after rectifier) - it was spinning just fine.
@ kreutz - yes it seems...
I decided to add simple reversing switch. I have seen similar mods on the net,
so I thought that it is going to be an hour job. At most. Apparently I was wrong.
Motor:
Type: 95D-1
350W DC...
One more thought. I just realize that Y-axis was giving me problems
from the very beginning. While X and Z was always working nice and
smooth, Y was louder, sound choppy, tend to bind or loose...
Hi Rob,
that sounds like a good idea, thank you.
Please see attached files.
Some coments to attached pictures.
1 Y-axis works OK.jpg and 2 Y-axis binding problem.jpg
- just as in the...
I have china 17x15 gantry router from ebay conrolled from Mach3.
I decided to add limit switches using 3-wire PNP proximity sensors.
Electronic side works OK, but when limits are enabled in...
Came to very same conclusion. Since it seems quite logical
that you need to move focus down as you cut through thick
material - why not to employ machines own Z-axis control
to do the job right...