Search:

gunda
I worked on this problem for several days and I'm thinking I did use the M185. I think the bar feeder needs to be rewired.

John
Thanks again for your help.
When I got to work today the person that had drawn the print was thinking the bitish threads he wanted were metric. I just read somewhere that many people think...

John
Thanks for the reply.
The print I have calls for ISO 7-Rc 1 1/4 threads and notes at the bottom of the print call for Metric.
I can't find anything on the net about tapered Metric...

Are British tapered pipe threads considered metric?
At work, they want to make some ISO 7-Rc 1 1/4 tapered threads and they are calling them metric and use a 60 degree insert. I'm thinking they...

Worked on this problem a little more today and used the airblow m89 & m88 and the spindle would turn like I wanted but I was getting a 3718 or 1740-1 alarm as the feeder was pushing the bar through...

The controller is a OSP-P200L. I played around with the machine today and could not get it to read past the M185 line. No matter where I put the M185 in the program it would stop on that line and...

fordav11
Thanks for the reply. I have used those main spindle M codes and had no luck.
G97 S5 M04
M185
M84
M436
M05
M83
M184

I have a basic 370 with a FMB feeder and I need the spindle to slowly turn while the chuck is open so hex bar can be loaded. How do I bypass the chuck open alarm?