Thanks a lot, it worked!
Kind regards
Hannes
Type: Posts; User: hannes123
Thanks a lot, it worked!
Kind regards
Hannes
Hello!
I have a milling machine with a Siemens 840D powerline and I need to find out the current toll number of the tool in the spindle. What command could I use?
Best regards
Hannes
Hello!
Does anybody know where I could get such carbide plates?
Thread carbide turntables – buttress thread DIN 513 pitch 10mm
Greetings
Hello
If I correctly understood you, then here’s a just normal cycle:
0 BEGIN PGM $MDI MM
1 TCH PROBE 413 BZPKT KREIS AUSSEN ~
Q321=+50 ;MITTE 1. ACHSE ~
Q322=+50 ;MITTE 2. ACHSE ~
Q262=+0...
Hello
Today I’ll have to deal with MillPlus (V410) again – with parameters.
Actually I’m just going to program a simple jump instruction.
I want the program to continue at clause 23 if the...
Hello
Does anybody know where I can find a complete list with FN18 commands (iTNC530)? Not all of them are in the user manual.
Today I needed the function for readout of an active zero point –...
Hello!
I’ve got the same problem!
If you find a reasonable solution, let me know.
When I work at the machine, I reduce it with FMAX. Otherwise – with parameter program.
Regards, Hannes
Hello!
Thanks for your help!
I don’t know about the softkey
I want the fmax value to be reduced only during one program, and then to be restored again.
With a softkey it’ll be reduced for the...
Hello
Is it possible to affect the value of Fmax in the program at iTNC530?
I’d like to reduce the rapid feed for a certain program field.
Thanks for your help!
Hello!
Take a look at “Winashape - Millplus”.
Although it’s Heidenhain Millplus controller, but the follow-up of the 432th.
Unfortunately there’re only 100 clauses possible in the demo...
Can I also see the time with MSG?
How long will the message stay?
Thanks
Hello!
Try that with G11
Here’s an example with Z as tool axis (G17)
G0 X-10 Y-10
G1
G43 X0
G41
Hello
Is it also possible to define a graphic for round parts at 840D?
Regards, hannes
Hello,
I’d like to know whether CAD-reader is usually installed or is liable to pay the costs.
Thanks for your help
Regards, Hannes