Search:

So between 301 and 303 are 22,4V and between 304 and 305 28,4V

Hello

I have the 9...
I just read a little bit and know I know how to view the I/O status.
How should I proceed?

Thank you
Regards TM

Thank you for your help. So far I thought the follow-up error is the other way around.
I would say the cams are all correctly. Where can I search for a potential cable break?
Thank you!

Hello don’t you have any documents about the machine/controller?
(is it the machine or do you just done know how to do it?
Regards

Hello

My machine continuously displays error I62 (gear steps not in defined position) and stops /turns off randomly. I think it has something to do with the control voltage.
impurity message:37-...

Hello
gear is controlled over tappets. Unfortunately I don’t have a clue what all the cards are doing..
A cable would be possible but not very logical as the error only happens every once a while....

Hello

I have a problem with my Maho MH300c, controller 432.
In the middle of the program, the machine stops and it displays error I62 (gear speed in undefined position)..
When deleting the...