What are you using for way oil? I am assuming most users are using a #2 way oil rather than a #1. Is this correct?
Type: Posts; User: whitefox
What are you using for way oil? I am assuming most users are using a #2 way oil rather than a #1. Is this correct?
I emailed and had Dyna Mechtronics quote. They are still available. They are ~$90 a piece.
I discovered after talking to them that the gear I though was broken was okay. I plan to order a...
I was hoping for some clarification. I have only seen the oil chart and table from bad scans.
My mill has the manually operated piston type oiler, and calls for Shell 32T. Why are there so many...
Does anyone know if DM2400 replacement gears are available?
I plan to contact Dyna Mechatronics about replacement gears. I believe I ruined my Y axis gear during some tinkering with GRBL.
I...
I missed the question I really should have asked. I didn't even think to ask anyone about the typical pinout on this machine.
I found this excel sheet at...
It isn't the same motor. It is a disc stepper. I believe it was actually made by portescap for Kollmorgen. I called and spoke with Kollmorgen and they didn't keep any information on that motor. ...
I reattached the photos. They are nothing special, but show the transforer, and how large it is.
https://www.cnczone.com/forums/attachment.php?attachmentid=398554&stc=1...
I am curious if anyone has any information on the PMI SynchroStep model# 00S52R6008 8 wire stepper motors that came on the dm2400. I have tried to search for information and have come up empty...
EngraverGar,
I must note that on my mill earth ground is still run into the mill, so it isn't truly an isolated transformer. I don't know if that means it is only a step down transformer, as I...
EngraverGar,
It may have been installed as an isolation transformer. It definitely was installed as a step down transformer for dropping from 220V to 110V if needed.
The whole mill is run...
They are useable for certain applications. It really depends on what properties you need. If you can reason through the expected failure mode, you can often design the part and orient it in such a...
It is a transformer feeding the main cabinet. On the inside panel from my mill there is a wiring diagram for wiring 220V/110V. I'm not sure the supply voltage out of the transformer, but it...
I ended up buying the DM2400 today. I seems like the controls could be functional as I can jog all the axes in emergency mode and start the spindle locally. I can't seem to get it to do anything...
The larger travel of the Concept Mill 55 is a definite appeal. It's travel is still small, but it is 7.5in x 5.5in x 10in, but I do wonder about the reliability and durability of it. I know that...
Gentlemen,
I posted this over in the Dyna section as well, and figured I would post it here as well.
I am going to look at two benchtop mills this week. I don't have a good feel for the...
Gentlemen,
I realize this may not be the best place to post this, but I figured it was a start. I am going to look at two benchtop mills this week. I don't have a good feel for the condition of...
Hey guys! I have been a lurker on the cnczone since about 2009. I do some machine programming with a sinumerik 840d sl, but that has been more machine tool programming for friction stir welding...