Just a reach Out. I am interested in purchasing any of the Glass Scale components. Covers, cables, boards, and glass scales, even if they are not working. I have two 4020s, a 3016, and a 2216 with...
Type: Posts; User: Axxtion
Just a reach Out. I am interested in purchasing any of the Glass Scale components. Covers, cables, boards, and glass scales, even if they are not working. I have two 4020s, a 3016, and a 2216 with...
Hey Nick,
Here's an old program. T1-T4 are front post using G69 and T5-T8 are the rear post using G68.
%
O1( 30524-0100 01V.NC )
G28U0.W0.
( VICTOR 3T )
( 3/2/06 AT 5:26 PM )
( )
There is no problem making parts and i agree that it is more of a cosmetic/visual problem, but my old Fanuc 3t would zero out all the registers and i would like this 21i-t to do the same. maybe i'm...
my Z tool length offsets are in relation to the 11.8311 at the home position. If my part Z0. is 7.00 inches from the machine home, my Z offset reads 4.8311 rather than a -7.0000.
It seems that...
thanks for the response guys.
all the ref points and offsets where set at zero
i should have been more specific.
after powering up the machine and homing the machine, the control reads
...
I purchased a used Fanuc 21iT on a Mori Seiki SL-3. It makes good parts and seems to run fine and hold tolerance.
The problem I'm having is that after power up, it doesn't zero out after homing...
thanx for the response. i found another program that will render the stl to facets and from there i can render to igs geometry and import it back into gibbs as real geometry.
thanx again
In SW, i import or input a part to machine in one file and in a seperate file, i create my stock material size. i then create an assembly of the files and export them into Virtual Gibbs for...
i am wondering if it is possible to convert a rendered toolpath that has been saved as an STL back into a solid so that it could be used as material for the next op?
thanx for looking
i'm lookin for a simple fadal 4th axis. anybody out there?
Thanx guys but i got it figured out. it works great
all the best
Well I just changed my parameters and got G68 mirror to work. I am wondering if this will change the direction of the tool compensation offsets from plus to minus (or vice versa) also for the tools...
Well I just changed my parameters and got G68 mirror to work. I am wondering if this will change the direction of the tool compensation offsets from plus to minus also for the tools that i mirror in...
I've got a Fanuc 3T on a Victor flat bed with 2 turrets. I have been programming the front turret with X+ and the rear turret with X- forever, and the post on my cad/cam doesn't support this. I have...
I really didn't want to pay 2 grand to have some parameters turned on for a machine that's 28 years old.
I've got a Fanuc 3T on a Victor flat bed with 2 turrets. I have been programming the front turret with X+ and the rear turret with X- forever, and the post on my cad/cam doesn't support this. I have...
I've got a Fanuc 3T on a Victor flat bed with 2 turrets. I have been programming the front turret with X+ and the rear turret with X-. My post on my cad/cam doesn't support this. I have written a...