Hi Eveyrone:
I've got a bunch of Fuji ANW-series lathes that use Fanuc 0i-Td controllers. These are twin-spindle lathes that have totally independent sides, left and right.
I want to import...
Type: Posts; User: Faust
Hi Eveyrone:
I've got a bunch of Fuji ANW-series lathes that use Fanuc 0i-Td controllers. These are twin-spindle lathes that have totally independent sides, left and right.
I want to import...
Hello All!
I've got a Fuji ANW-3500 twin-spindle, robot-fed lathe that keeps eating the main spindle drive belts on one side only!
We've replaced multiple belts (like 8) in the last couple of...
I took a look at the ladder, and there is a chuck that's using bit F64.1. My problem is precisely that F64.1 isn't coming on even when the tool life is set to zero. The problem, I think, is that...
Ladder mods aren't a bad thing, I just don't know really where to start, because I don't know where the current tool life counters are stored. We're using the PMC to control tool life.
There's no...
Good morning!
I want to add functionality to my Fuji CSD-300 machines. They're running a Fanuc 0i-Td controller.
I want to make it so when the tool life counter is reset to zero, the wear...
I didn't know what #1133 was until I looked it up. Interesting.
So, could I write:
#1133=400.0
in the NC, and then use that value in the ladder somehow?
How would I access the #1133...
Hello all!
I've got a problem I can't quite figure out.
I have some custom ladder software (that I wrote) on my Fuji ANW-30 lathes. It does broken insert detection. (Not chipped or worn, just...
Hello Everyone!
I've got an ancient (well, 1999-vintage) Mori-Seiki RL-253 twin-spindle, gantry loader-equipped lathe running a Meldas 60 controller.
To co-ordinate the actions of the lathe NC...
Good day, everyone.
I have a question that relates to Fanuc 18i/180i-Tb controllers. But I have to explain what I'm doing first.
I have some Fuji ANW-30/3000/3500 machining centres. They run...
Okay: In case anyone else cares, I figured it out with help from DMG-Mori in Canada.
The problem is the turret position. The two parameters #6302 and #6313 were set to 11. These are the LS and RS...
Okay, more info:
I got the ladder out, and it seems that there’s one bit that’s holding up the M3755 “Loader Machine Position OK”, and that’s M3228 “Turret Data COIN#L”.
What the what is that?...
Good morning!
I have a fun one for you guys!
I've got an old (1999) Mori-Seiki RL-253 lathe with a gantry loader on it. I'm trying to teach the loader the points for loading the spindles, but...