Anyone has fidia (C20) programming manual to share?
Best regards!
Type: Posts; User: Cimrez
Anyone has fidia (C20) programming manual to share?
Best regards!
Hello,
I would like to change some of the machine parameters with the NUM 1040 controller.
From information that I gathered that is done via “CN UTILITY -> 0 ACCESS TO UTILITY PROGRAMMES” but when...
Thank you for the quick reply!
Tested this today and it seems this was the problem all along. The 2003#1 bit was already set to 1 and parameter 2064 was set to default 4. We had to increase it...
So today we tested some more combinations:
1. We have connected X and U scales with new cable and the “416 SERVO ALARM : U AXIS DISCONNECT” still occurs. The X is OK with this new cable.
2....
Our boards are:
a16b 1212 0871 (PSU BI)
a16b 3200 0010 (FS16B MAIN)
a16b 2202 0400 (OPT2)
The HEAD2 (U&W) are connected to the 3. board, connections JV5, ENC5, SCALE 5 for U and 6 for W.
By PSU,...
Thanks for the reply!
Amplifiers display "0" at the start but after the error U amplifier (and W, so both HEAD2) display "-" (no error number).
You think this could be because of the amplifier? But...
Hi everyone, we are having issues with commissioning a vertical lathe machine with double column and would like to probe some of your experience and knowledge.
Axis are as follows: one column...