Hi all,
Looking for a parts manual for a Romi G30 CNC Teach Lathe with gang tools. If someone has one, I would like to get the part number for the gang tool cross slide.
Thanks in advance,
...
Type: Posts; User: jschmid
Hi all,
Looking for a parts manual for a Romi G30 CNC Teach Lathe with gang tools. If someone has one, I would like to get the part number for the gang tool cross slide.
Thanks in advance,
...
Not sure where to put this, I want to put an automatic tool changer/turret on a lathe with a Anilaam 4200T control and wonder if anyone out there has done so. The lathe manufacturer has a tool...
Looking to add an automatic turret to my Lagun RL 1440 A Plus cnc lathe. Has anyone had any experience with the Chinese made units. Really don't want to go there but trying to find a turret for...
Hi all,
Looking at purchasing a used lathe with an Anilam 4200T control and would like to know if people out there are happy with the control and support or is this something I should stay away...
Hi all,
Looking for a repair facility to test and repair my Fanuc AC spindle drive boards. Looking on the internet for repair facilities is kind of a crap shoot. Can anyone out there suggest a...
Hi,
I don't have the screens you have posted, but when I turn on the machine, the startup screen shows I have 64K memory with 1152 extended memory. On one screen where I can access the editor...
Hi,
Can anyone help! I have a Chevalier Lathe-Plus with an Anilam 1200T control. I have the machine running fine accept when I try to edit, I get an alarm "not enough memory to run editor". I...
JUST WONDERING IF SOMEONE OUT THERE HAS EVER CONVERTED A JET 1340W LATHE TO CNC. IF THEY HAVE I AM LOOKING FOR THE LEFTOVER PARTS. PRIMARILY THE GEARBOX. I HAVE A NEW 1340W LATHE THAT WAS DAMAGED...
Bob,
Thanks for the reply. I purchased a Shoplink Flash 2.0 and have been extremely pleased with its operation. Simple, simple and very inexpensive.
Thanks again,
Jim
Not sure if I'm in the right spot but here is my question. I'm considering going to a handheld device for loading and downloading programs to my machines and am wondering which device,if any is the...
Hi,
Need help with communications setup. Everything was working fine until about two weeks ago. My problem is I can send a program to my machine (Fanuc OT control) but I can't receive a program...
I got the machine working again with the Anilam control. Anilam has a battery powered chip on the board called a Dallas chip instead of a replaceable battery. So to fix the board you have to...
Hi,
Not sure if this is the right place for this but I'm looking to retrofit a Chevalier LathePlus with a Anilam 1200T control. Any suggestions?
Has anyone used CS Labs CNC products? Their...
ROMI/BRIDGEPORT 35 ALARM -GEAR OUT POSITION HOW DO I RESET TO CLEAR THE ALARM
THANKS,
JIM
Got it figured out, if anyone else has
this problem, contact me.
Jim
Dave,
Yes, the problem was solved. I had gone through numerous trial and error suggestions and the final fix was: Shutdown the machine, on startup, hold down the "P/Q" button and the "Cancel"...
Hi,
Looking for a chip conveyor for this machine
Thanks,
Jim
I have a Chevalier 2040MV with a 16 position carousel tool changer on it that is out of sync. Can someone out there tell me how to get it back into the right positions? Is this a parameter change...
The alarm message I'm getting is "unchuck"
Jim
Hi,
Is there a parameter I can change to allow my control to default back to a different screen? Everytime I unchuck a part the control defaults back to the OPR/ALARM screen and I would prefer...
Thanks for the reply,
907 parameter is 01011010
Jim
I'm sure this has been discussed at some point, but which parameter do I change to get the parts counter to just count the number of pieces I am machining without having to put in a count-up or down...
dcoupar,
Thanks for the quick reply, your program helps alot. I wasn't getting the thread cut deep enough but now have it working ok.
Thanks again,
Jim
Hi,
Programming on a Fanuc OT control using 2 line format. I'm programming an OD pipe thread (3" pipe-8 tpi) can't seem to get it working correctly. Is g92 or G32 a better way to go?
...
Hi,
I have a Chevalier 2040MV, 16 position tool changer (caroulsel type), Fanuc O-MD control. Getting a 2030 limit switch alarm which my manual says it is tool changer limit switch error. Both...
Hi,
We have a Chevalier 2040MV with a 16 tool changer and Fanuc O-MD. Can't get the tool changer to change tools. I have gone through the Z axis tool change point adjustment ( bought the machine...
Hi everyone,
Recently purchased a Chevalier 2040MV vertical maching center. Having problems with the tool changer, Z axis grid, etc. Is there a Tech out there that is familiar with this machine...
Hi,
Does anyone know if there is a parameter that can be changed to activate a parts counter and timer on this control if available?
Thanks in advance,
Jim
Need Help!!
I just purchased a Romi Centur 35 lathe and if someone out there is running one, can you tell me if the button between the Spindle CW and Spindle CCW is active? I don't have a way to...
Hi,
Is there a way to stop the spindle during a program to change inserts, check a size etc.? Fanuc OT control Romi 35 lathe.]
Thanks,
Jim
Newbie,
Is there a way to stop the spindle during a program to change inserts, check a size etc.? Romi 35 with a Fanuc OT control
Thanks,
Jim