Any body know what this is, and what's the use of if.
Mesaurement 172x25x5mm
engraved:
228
stridsberg
sweden
thanks :cheers:
Jens Præst
Type: Posts; User: praest
Any body know what this is, and what's the use of if.
Mesaurement 172x25x5mm
engraved:
228
stridsberg
sweden
thanks :cheers:
Jens Præst
In fact I'm asking for a former woorkmate.
I know the matrial and ther's 400 of them.It's to be done at a (older) Mazak bench.
Can't remember max rpm, about 4000
>>just got confermation 4000 rpm...
I need to make some ø13mm holes right through (l=72mm).material is 1.4980/660. It's a bleeding hell drilling this stuff.
I prefere a supplier in europe/denmark
any help is appreciatet
Hi there
Anyone who can trun a flange ø911x100 in 304 and a 3.1A ADW2 certificate
I have 2 seperate drawings aprox. same size.
volume: 8 each.
Pleace contact me for drawings if you'r interested...
Hi there
Anyone who can trun a flange ø911x100 in 304 and a 3.1A ADW2 certificate
I have 2 seperate drawings aprox. same size.
volume: 8 each.
Pleace contact me for drawings if you'r interested...
We have all our drawings in dwg-format, but the welders ( and me if theres any milling to be done) need a paper copy. We don't have 50" flatscreens at each workplace.
Perhaps I should mention this...
Not quite sure of the forum, but anyway.
How do you manege you'r drawings.
Here at my work we primarily assemble stainles pipes and tanks, and therfore somestimes, rather often, have drawings in...
After some playing around and trying the same things twice, suddenly there was a useful connection.
I never got the TNCserver to work rigth, but we have purcased some software called CIMCO DNC-Max 5...
:cheers: Downtown Nakskov is where I'm located, just me jusing cnc at the shop so I find this site usefull
greatings
Jens Præst
Hi there
I'm from the south of denmark, and have got help in danish:wave:
nede fro lolland hvor roerne gror, og de gror og de gror og de gror
Nice to see it's not all americans
TNCserver don't know when to stop transmitting, keeps on reciving when the control's at an end and rady for next pgm. When it's the other way control claims incorrect data and TNCserver keeps trying...
I guess it'll be an outside job.
Then I don't have to take the blame if ther's a f... up:)
And I don't think that I can presuade my boss to give me CAM in birthday pressent
I've been asked if it's possible to make a fixtyre for the press, so we can place a Ø38mm 45* bend and press it at the end.
Can my TNC-155 do this task, ( I don't have CAM:drowning: )
I can recive a pgm on the pc in recive ME on TNCserver, but I can't send a pgm from pc to TNC155, just BEGIN PGM and END PGM arrives and the pc just go coma-mode, anybody have the correct set up for...
:banana: Har fået styr på det hele igen, jeg var lidt galt afmacheret i syntaksen.
Alt ser ud til at fungerere
Har lige opdaget at LBL 0 bliver ignoreret , ups.
Nu prøver jeg med en henvendelse til TP-teknik, med mine små og ubetydelige problemer
Mange tak for hjælpen til alle deltagende.
Thanks to the non danish speaking too
Jens Præst
Jeg har lige prøvet med LBL igen nu vil den godt kalde sub-rutinen og returnere ved LBL 0.Men vis jeg skriver LBL CALL REP 3/3, så kalder den kun rutinen ÉN gang:confused: :confused:
Frank>> jeg...
Jeg har arbejdet på denne maskine på en tidligere arbejdtsplads, blev udlært på den. Mit nu værende arbejde har så købt maskinen, haft mig som opstarts/programmerings konsulent, ladet den stå slukket...
Jeg har kikket i manualen, det eneste der står om maskinparameter er hvordan man taster dem ind når strømmen er gået totalt.
Der står intet om den kode du gav mig.
Hvor finder man den form for...
Mange tak, rart at møde en landsmand, så behøver jeg ikke sidde med de tekniske ordbøger
mvh
Jens Præst
the control is TNC-155 by the way
I've been writing before about LBL-CALL
Got the advise to look at the machine parameter, how can I do that???
Guess I'll try the free download for a couple of days then
Could I use Heidenhain plain launguages in the cutviewer program that you use John??
It's just at the end of the arc (about 14-15 degrees before the end), just when the mill is commimg free of material, overlength is 1mm.
I suspect that you'r solution will work out fine
I'll guess...
Thanks for the help and inputs.:) Apreciate any contact, cos I'm CNC department at the shop
I'll try next time to cut it twice using 2 R-values
from the end of the piece to the buttom of the arc, there should be 20 mm, and the radius of the circle is 30mm, so I think the CC is allrigth, but
I had to program it CC X496 Y-37,5 to get the...
I find it usefull to name each program after the drawing, them with a A,B,C ect.
ex.
12058A first operation
12058B second operation
and so on
and then place each custermer in seperate folders....
Code used Heidenhain plain lauguage programming
Tool def 1 L=0 R=6
Tool Call S=70 (ca. 700 rpm)
L X 500 Y-85 Z 1 F3000
L Z -13 F3000 M13
L X 485 RR F3000
L Y-65,784 RR F100
CC X 495 Y-37,5
C...