Howdy folks!
New to the forum so nice to digitally meet everyone!
Let me start you off on my journey!
I've been pulling my hair out trying to find the right cnc plasma cutter and was hoping...
Type: Posts; User: Techbuilder
Howdy folks!
New to the forum so nice to digitally meet everyone!
Let me start you off on my journey!
I've been pulling my hair out trying to find the right cnc plasma cutter and was hoping...
I know this is an old post but just be aware that Mac is rparrish47 posting on the cnczone so disregard his comments as credible.
You were aiding to a conversation that was specified to a specific individual so common sense would generally come to mind for most people who have it.
I'm not offended by you at all your just...
The PM-932 is actually 1/2" shorter if you read the travel length with power feed compared to the PM-45 which is more realistic when you add your stepper motor.
Honestly dracozny what is your...
I agree.
jid2 is their anyway you could provide me with the lengths, diameter and pitch at least?
Hi Dracozny,
I understand where your coming from but as I stated I don't have the machine in yet as I still have another 6 weeks till it comes in and I wanted to purchase everything for the...
Judging by your design I would be a fool not to follow in your foot steps ;)
The only slight possible issue I see is that I ordered the PM-932M however I believe there is only a difference in the Z ...
I know this is super old but do you have the dimensions for the length, width and pitch or a drawing of what you ordered from linearmotionbearings2008?
I haven't received my machine in yet and I...
I know this is old but I'm now in a situation where I could use this
I need control of all three axis x,y,z
the control is a mx-2 and I believe the drives are yasnac
Good to know thank you guys
Mostly surface rust but what if it has pittting?
I have some pull studs for my BT35 tool holders but there a little rusted any tips on how to remove the rust without damaging the pull stud?
It's a key for a German car I believe
I forgot the name but it's none of those company's for sure
It's an old work friend and I'm charging him for this.
They don't make these keys anymore that's why he
asked me to make them for him.
Hey folks I have a job here given by my friend to try and make these key blanks
but of course in the automotive industry they have no clue what a print is and have no dimensional information for me....
I have no clue how to change the cutter comp for each tool
is it in the program or in the parameters?
I looked in the manual but all it says is D for height off set and H for cutter comp
but...
Every time I upload a simple file from MasterCam X5 , I try to run the
program and keep getting a 211 alarm code which is
CNC Description: STORED STROKE LIMIT FIRST AREA X.
Yasnac alarm: 211 -...
Hi everyone I need big help
I have a Matsuura MC-500v2
and my machine coordinates start from 0 into the negatives so basically
I can't go past 0 home into the positives only into the negatives ...
Well what kind of limitations would they be?
Can I use mach 3 to control my yasnac mx2?
Any help would be greatly appreciated
I still can't get it to work
can someone possibly make a quick master cam file
so I have something to learn off of
here's the simple test I wanted to do
That's awesome thank you very much!
So I'm very new to this and I'm a college student and I bought a cnc machine to mess around with.
Now I have a 3d part in Solid works and I imported it in to mastercam x3
and when I go to make a...
Hi everyone I just purchased a Matsuura MC-500V2 With Yasnac
and I'm a student trying to start my own machining company
and I can't seem to find a well price CAM software with a Yasnac post.
...
Hi everyone I was hoping maybe you might be able to help me out with a question I have.
Well I wanted to build my own servo controlled Rotary indexer and a Trunnion Table and I was curious if it is...
Well I guys I took half of your guys advice and bought a machine and sold the bridgeport, it's a 1985 Matsuura MC-500V 2
With a 20 ATC and flood coolant I paid 5,000 for this and take in mine this...
Well that's good then I wish you luck and
hopefully everything pans out if you ever need any info or a machined part for your machine don't be afraid to pm.
Well then that's different if it's for personal reasons
as far as a rigging company it's only around 700 to 800 bucks depending on the company and they do all the work the machine was also 8500...
You should of bought a cnc machine ready to go
so that way you could get started working and not loose more money while
time is spent on this.
Why exactly do you need such a long table?
Also...
the link was actually for 79TigerPilot as for a series 2 i have never seen plans available for one but then again I never checked.
My 1968 Bridgeport mill weighs 2200 pounds