Search:

Yeah, cooling was working fine... I sent it off to be tested and it does need a recharge...

Pm sent

Hey all, I need to replace my 19mm X 3mm mirrors in my 30 Watt laser. On eBay I see gold colored mirrors but on my machine they are silver... Which is better?

Hey guys, I have a serious question. I have a Pinnacle Accuris Powersharp 16 30watt Laser Cutter. It has a firestar v30 Synrad Laser in it. The tube was manufactured in 07' and hasnt been used much....

Not to sure if it can be pressed out. I'll. Have to try. It's actually the plastic/nylon part that needs to be replaced. It melted during a laser cutting job.

This bearing failed on my accuris laser. The company no longer exists and need to find this part for the X axis. Where should I be looking for a replacement part and what exactly would you call it? ...

Thanks! Here is a link to more info on it along with a video..

http://edsjunk.net/EdsJunk/Blog/Entries/2011/12/21_Dedicated_Mach3_Control_Panel.html

So here is what I got....

On the X axis.. Zero'd on the Left side, and got like .18" on the right...
On the Y axis.. Zero'd on the back side, and got like .08" on the front.

Closest I could...

Thanks guys! Love this! Will try it tommorow!

And the correct way to do this?

Also what exactly do I need to do to "tram" my spindle?

And I almost bought a dial indicator yesterday! I'll go back and pick one up tommorow. Did you make the mount to go in the spindle?

Here is mine! Rest of electronics are in a computer case under the router.

So I cant figure out why my router is cutting my pieces like this everytime... on happens on the Right and Bottom sides. You can see each pass decently well. My machines seems very tight. But still...

guys thanks for the tips! This is was my bad and it looks like in Mastercam I had the rapid height set was not set to absolute!

So mach3 is doing a rapid before z finished its movement to clear the material. why would the machine start doing this? I slowed down my Z to Accerlation is 5 and velocity is 50 and thats when it...

I'm in the fort, but no IC

Heres some more info and pictures on my site along with a video...

Dedicated Mach3 Control Panel

For 179 (plus 60.00 Shipping to US) You can get this wireless pendant rom saleCNC and even has a LCD that shows you your machines coordinates. Seems to cheap for what it is?? Has anyone tried this...

Yeah that's a good idea. Maybe on version 2?

Walky, keep your eye open on eBay, theres a guy that sells these keyboards, 2 for 50 bucks.

I'll check it out!

The keyboard model number is DU-5K-USB it is not wireless, but is completely sealed so dust can not get under the keys. The mouse is kinda a "mouse stick" and us also completely sealed. If you notice...

An ipac is a keyboard emulator for mame arcades. So using that I did not need a second parallel port, just a open USB!

Thought you guys might find this interesting. I got alot of help from you guys getting my warthog router up and running with Mach3, and I appreciate that! I always hated having a full desktop...

My mini itx had a 200 watt power supply

So what fixed it was another computer. Now I got a 2.6 celeron with 2gb of ram desktop. I guess that mini itx board couldn't handle it??? Seems wierd. But all is good now. Thanks for the help guys, I...

Well, since im running a mini ITX board, ill have to go get another computer and give that a try. It does output closer to 5volt though on the serial cable when i check it with a multimeter. Ill let...

X and Y is at 3.4 Amps, Z is like 3.0.

The PC is a 1ghz unknown what kind. its a Mini ITX motherboard.

I agree on getting one axis working at a time, my question still is tho, how do i fix it?...

It's a on board parallel port