This is probably as simple as pie, but when using g47 in mach3 how do i specify how many times it will repeat, thanks.
Type: Posts; User: CAD226B
This is probably as simple as pie, but when using g47 in mach3 how do i specify how many times it will repeat, thanks.
Thats the way to go! Here is another way to cut synchronous pulleys or gears. I usually use delrin, but this machine will work just as well with metals. this is fully cnc controlled with proper g...
The reason it looks that way is because I worked in machine shops and Weaver Scope back in the 60s. have good one....
Thanks a lot for your time and input. it all sounds too complicated for me right now. I think I will just restore the machine to its original condition. It did work before and produced thousands of...
Hey Jim, here are some photos, don't know if it will help a lot. The machine is not running now. The machine is a two step die operation so the ejector actually moves the piece 2 times from the first...
The machine is a wire bending machine (not cnc) which currently has an ejector that moves back and forth 1.75 " in about .67 sec. the current set up is not working so well. Is there a pin or pins on...
Using my x axis plugin with mach3 or uccnc and uc100 controller, with BOB (China) driver. I'm assuming I need an impulse switch on the machine. let me know if you need further information. thanks
I need to replace a mechanical phase of a machine with a stepper motor operation, so if I could use my cnc program software by just replacing the start button on the software with a mechanically...
So included is a photo of my stepper operated indexer for cutting syncronous pulleys and gears and the gcode that runs it. A is the spindle, B is the brake or locking. my question is how to how to...
Jim if you would like, I will send you some free samples.
Hey Jim , just browsing stumbled across your comment about wire bending and I thought I would mention the fact that I patented a wire product way back in 2015 called the peg hook staple US patent...
OK, I'm in the same boat. Only B axis is doing the same as you described. all other 4 axis working good. since its been awhile since your post, I'm just inquiring if and how you resolved the problem....
Is it possible to determine the wires from stepper motor A+ A- and B+ B- using a multimeter ? If so HOW ! thanks
I am using version 1.2049 and I do have numbers for 6 tools in tool table.
So why is it that my UCCNC software does not acknowledge g41 g42 and g40.
2 simple questions:
1. Can a stepper driver run a servo motor.
2. Can a servomotor run without an encoder.
Thanks
Good morning techsol, there are 10 sketches I really don't want to attach them to this site. It would be much easier to send them by email to you, only if that is acceptable by CNC zone. So I will...
ok techsol, I would have to say that generally these drawings which were done before the stabilizer bar was built are really just sketches on paint that may be helpful to you. Although they are drawn...
Good morning, recently I built a stabilizer for the spindle arm of my 1991 SHOPTASK MILL. With X amount of force applied perpendicular to the arm at the Z spindle axis the dial read out was .003"....
Would like to use this servo in my mach3 mill set up. Does anyone possibly have a data sheet or know how to get one. I have been trying to obtain information so that I can buy the correct driver and...
Looking for data sheet for this older servo motor. The first thing I need to know is if its digital or analog. If its anything like the older Italian steppers that I acquired along with this servo...
I do have an old version of turbo cad , but when I got newer computer I could no longer open it. if you could tell me how to do it, I would be glade to lend you the disc. not sure when you posted,...
Hey dgapilot, I just ran across some of the old drawings for retro fit Z axis that may be of some use to you if you are still interested. If you are, please let me know and I will forward them to...
dgapilot, Though I did respond the same day you posted, I will try it again, I never had real working drawings for the retro fit, only a bunch of PAINT sketches that only I could probably use. On...
Although this is not a huge problem, it can be annoying. I have mach3 on 2 computers. The one the runs the CNC show the image as slightly distorted, IE. a circle as an oval, with it being long on the...
Not sure exactly what you mean, please explain in detail, thanks
I do find it interesting and helpful. I still have my 1936 10" craftsman lathe and still use it all the time. I first got it back in 1970 ,used it in making custom billiard cues. Good story !
great job, so what is the other milling machine you used to build it, like instructor37 said not much of the original machine left. The only thing that looks similar to my 1991 shoptask is the green...
Thanks all, the last question was satisfied. The new ones are (1) since I did change the I and J to Incremental it seems that the screen display shows a circle as an oval (long the X axis) how to...
thanks a lot, I did what ger21 recommended and that did solve the problem.