Search:

Just an update on this post. The Doosan is running a Fanuc control so a 3 axis machine with the 4th axis as a bolt on rotary table is what Im looking for. Any help with a post processor for this...

Hi guys
Does anyone have a copy of a SolidCam post processor to suit a Doosan Mynx vertical milling machine with a 4th axis rotary table mounted on the table that they could share with me?

Yep. User name: Jake T-B. Number +64 275002034

Hi Guys

Does anyone have a list of parameters for a T32-3 Mazatrol controller showing axis encoder reference position parameters? I have a parameter book but the pitch error comp parameters,...

Hi there

We have checked the drive units. The X axis has alarm 43 on it, the other drives have E7. I have checked our drive manual and they show error codes up to 37, then it skips to 45. There...

Hi Stanislav

The x axis drive that is faulting is showing alarm 43. All other drives are showing E7.

Hi guys

I have an old Mazak Megaturn vertical lathe with a T32-3 control. It is now tripping out with an E-Stop alarm when the X axis is moving. I have checked the diagnostic page for more info on...

Hi guys
We are running an OSP P300 control on a lathe and write and run the program in IGF, not converting to Gcode. What I want to do is find a way to loop the IGF program. In Gcode I would just...

Hi guys
Does anyone have a post for an Okuma LB3000EXII-MY lathe? I have one arriving next week and would like to start setting up Solidcam to program it.

I had a similar issue years back with my X axis on our T32-3 controller. There was a parameter that adjusted this, if memory serves me correctly it was S11 or 12. There were X, Z & C axis values in...

Hi Guys

We have just had one of our turning machines that had an old 810T control on it retro fitted with a new 840D. On the new controller, when you are running a roughing cycle the actual...

Hi Guys

Does anyone have the backlash parameters of the X & Z axis on a T32-3 Mazatrol controller. I have a parameter book but the pitch error comp parameters, machine parameters No. 5 - 11 and...

Hi guys,
I have an old Mazak Mega Turn A12N m/c turning center with a T32-3 control that had its operating system crash. We had the Mitsubishi technicians come in and they confirmed that we needed...

Hi guys.
I have several custom face mills mounted backwards on their arbors to do reverse chamfering. I have sketched these in the shaped tool section but the zero point of the tool is always on...

Go to the @change_tool section of the GPP file. The most basic way would be to add a line just below the @change_tool line that look like this:

@change_tool
{nb ,'M05'}

This will stop the...

Hi Guys,
Normally Deckel machines have Heidenhain controllers on them, is that what this machine has and if so, what is the type. IE. is it iTNC530?

We have an old milling machine with an indexing head that rotates 360 degrees around the "Y" axis. The controller is an old Heidenhain TNC 355 that only has one coordinate system and does not have...

Process data not found is relating to the program its self. If you go back to the program edit screen while still leaving the alarm displayed you should see at the bottom of the screen in brackets...

I often have really large parts that push our machines to their travel limits. I simply draw a sketch of a box around my part that is the machines limits. I can then position this around the part...

Hi there,
Is there anyone out there running a Mazatrol T32-3 mill turn lathe in ISO mode that can tell me how to set the "C" axis datum?
I am trying to figure out how to set the "C" axis datum for...

Hi Bob

I had a similar experience a few times where the design model would get swapped with one from a different cam part leaving all my sketches hanging. Happened the same way - swapping jobs...

Hi Guys,
Does any one know the parameter to tune the backlash on a Mazak T32-3 controller? The axis we are having issues with is the "C" axis which is the main turning spindle/milling table when in...

Hi Konstantin

To save STL stock file from the solid simulation screen, see screen shot below.
113428

To save from feature tree, see next screen shot.
113429

If your cam part has multiple...

Hi there
If I am correct, you are trying to use the saved solid simulation STL file as the CAM stock model for a new CAM part which is no doubt a subsequent operation to the same part.
This can be...

Does anybody have a working DNC drip feed set-up with a Heidenhain TNC 355 controller? I have the data com's set-up so files can be up-loaded and down-loaded but when I try drip feeding, I can only...

When you program a part in Mazatrol, you should be able to check the tool path (feed and rapid moves displayed using solid or doted lines) from inside the program edit section but on our T32-3...

If you have a face or shoulder you can take a tool that is set correctly up to, you can write down the machine position. Then move the set tool away and bring out the new drill after you have loaded...

Hi Guys,

We have a Mazak Mega-turn with a T32-3 controller on it but when we purchased the machine second hand, it never came with the parameter book. Does anyone have a PDF file they could send...

Hi Guys

I have just got a Doosan Puma 280LM lathe with live tooling that I need to set a post up for. Does anyone have a post already set-up for a Fanuc mill turn? Its always good to start with...

MAC Edit was removed from the installation files a few releases ago (can't remember what version). I had to re-install a previous version to get it back. If you do this, make sure you only use mac...