Appropriate suppliers have been found. This RFQ is closed.
Type: Posts; User: upnorth65
Appropriate suppliers have been found. This RFQ is closed.
Inside tapered bore tolerance: +/- 0.05mm
Outside diameter tolerance: +/- 0.009mm
Aluminum or brass is fine, whatever is easiest to achieve tolerances. Drawing correctly shows required M5 x 0.8...
I will get back to everybody who has responded once I have a proper 3D object file.
This RFQ can be considered closed.
Updates .zip to include .step file.
I need a prototype of the attached file and then a production run of 25-100 in 1-2 months. Thickness is 2mm, but thickness can vary +0.5mm (14awg-13awg). Needs to be a stiff aluminum, grade not...
Needs to be 2mm +0.5mm (13awg-14awg).
I need a prototype of the attached file and then a production run of 25-100 in 1-2 months. Thickness is 2mm, but thickness can vary +/- 0.5mm. Needs to be a stiff aluminum. Not too picky about...
Per M4 and M5 dimension data in the following table. Outer diameter and length of anvil about 20mm (give or take a few mm, doesn't matter). I may need the countersink (A measurement) enlarged a...
Hello! Just a hobbyist looking for some custom tooling. :o