HI,
Just recently purchased Tsugami CNC lathe with Fanuc 6T
We have Tsugami with fanuc 10T and have some experience.
The setting of offsets is diferent so we need Operators manual for fanuc 6T...
Type: Posts; User: marto74
HI,
Just recently purchased Tsugami CNC lathe with Fanuc 6T
We have Tsugami with fanuc 10T and have some experience.
The setting of offsets is diferent so we need Operators manual for fanuc 6T...
Thank you for the answer.
Until the present moment I was counting on the service of the local HFO.
I'm runing 4 haas machines.
Can you please point me to somebody selling encoders.
Thank you in...
Hi,
We are ruining Haas Mini lathe since 2004
In 2008 the spindle encoder ( Some HEIDENHAIN) was replaced by local service.
Now it's dead again.
My local HFO is refusing to deliver the part to...
Hi,
I own HAAS TM-1 and VF1. TM-1 is 2003 and VF-1 - 2006
Now I 'm looking at TM-2.
Can You compare both TM-1 and TM-2.
Is there a diference in the tableways and ballscrews etc.
Regards:...
I had the same problem with my TRM 1
Except the allarm the machine was working ok.
Just the alarm evry time you change the active program.
I do not have floppy too.
So HAAS service man came and...
hi,
I have MAHO 800P
The control is the same
Regards: MArtin
HI ,
neck of the woods????
Thank you :)
The american machines specialy HAAS are well acepted 2 years now because of the good price .
In the past before 1990 the goverment compnaies bought mostly...
Hi,
I am from Bulgaria. Unfortunately I don't have experience with older than 2001 HAAS machines as we have a HAAS sales office and service here since 2001.
At the moment I own 2 machines HAAS...
Hi,
On our 2003 Tool Room Mill 1 we have the folowing problem:
When the operator is changing the active program (from O1990 to O1991 as an example) there is small delay 1-2 secs and alarm mesages...
Here is our ontacts:
www.technomach.dir.bg
[email protected]
[email protected]
Regards: Martin
Hi,
We have TRM-1 and we did received this 2 1/2 d esprit.
It's now somwhere in the desk of one of our cnc programers.
We did not even tried it , because I did tested Esprit a few years ago and it...
Thank you All for the help.
It was the fuse insight the servo amplifier.
We just did removed the "gold" cover and replaced the fuse with one of the spares that are in the cabinet.
Regards: Martin
123 Error
A few minutes ago our 2003 Mini lathe did the folowing:
The spindle stoped and there was allarm 123 Spindle drive fault
We did restart the machine: It's moving no alarms but when I'm...
Hi,
Thank you all about the coments .
We have this HAAS MINI Lathe now:
MAchine, High capacity coolant, Samsys Multisaver 5.55 Magazine Barfeeder.
The machine was delivered on 18-th of January....
What about the precizion and holding tolerances with HAAS MINI LATHE??
Regards: MArtin Sirakov
Hi,
At he moment we have the chance to get one HAAS mini lathe with magazine barfeeder at very afordable price.
In the HAASCNC.com I saw that HAAS is not manufacturing this machine tool.
Is there...
I did tried this .
So the steps are:
FeedHold
Axis letter
HandJOG
joging the axes
stop spindle
check inserts
MEM
START
Ok I'll try it today
And I'll write here if it works
Thanks : Martin
But I do not have remote
Can I do it with jog section on the keyboard??
Regads : Martin
I've HAAS TRM 1HE
Can anybody help with this:
How to stop the program, then stop the spindle to inspect the tool, change the inserts if needed , then return to the actual position where the...
http://www.edgecam.com/
Reagards : Martin Sirakov
I work with SW models and I do the G-code
with EDGECAM
It works great on SW, SE , Pro-E,Inventor solid models
Also the posts are very easy .
Regads: Martin
YES we do several test cuts.
We do lubrication- cooling with so called "oil in water" special product from Mobil OILs.
All the parts on CNC automatic lathes are turned with coolant
On mechanical...
Hi,
We do big quntities of turned brass parts with knurling by DIN 82 0.5 and 0.6 mm pitch ( the parts are 6 - 16 mm DIA)
The CNC automatic lathe is working 24 hours and usualy we need 1-2 hours...
Hi , If you start now You'll just have to read the manual and starting book that are inside SW
REgards: Martin
HI klox,
I've tried EDGECAM to generate CNC code for our AGIE wire EDM
specialy for 3D (4 axes) but no sucess - very strange results.
Some friends in BG CAD/CAM forum reported the same poor...
Hi,
I'm wondering if anyone can give me advice on what DNC software I can use with HAAS CNC
Regads: Martin
I'm not sure what do you mean
If it's that I'm looking for cheap machinetools?
The answer is:
I'm working in Bulgaria- Eastern Europe
We are working at about 4-5 USD/hour - price that custemer...
Hi,
Is there anybody using such a machinetool
Now we own HAAS TRM-1 and it'll make it's first cut in a day or 2
Our company is also workin in field of small turned parts in big Quantities (100000...
Hi, steveag
Is it true that TRM is not with central lubrication?
How acurate is TRM?
Can you reach +/- 0.02 mm in 400 mm?
Regads: Martin