Hello schnaepf!!!
I haven’t worked with GoElan for a couple of years.
Draw a block around the part, then subtract them from each other, and you’ll get the negative from.
Type: Posts; User: kroate
Hello schnaepf!!!
I haven’t worked with GoElan for a couple of years.
Draw a block around the part, then subtract them from each other, and you’ll get the negative from.
Hello!!!
Just make a DIN A0 sheet with additional views on it.
Zoom in the view that you need when you’re going to print. Or set in the window 2 points print.
Then you’ll all view in one...
Hello AndiKS!!!
It’s enabled in our case.
It doesn’t stand in the change log.
Unfortunately I can’t check until Monday whether the problem is solved.
Hello AndiKS!!!
Have you tried the new patch v6.9.252 yet?
Hello!!
Yes, there’re differences for sure. The lifetime is not as in case of a new tool.
Grinding by the manufacture is the best (certainly it’s more expensive).
You should try it once with...
Hello Marcel29!!!
What cycle do you use? You’d rather insert your complete program here.
Then we’ll be able to help you faster.
Hello MK1905!
Take a look here
http://www.emuge.de/deutsch/medien/softwar...fe_deutsch.html
Hello!!!
Has anybody already enjoyed the version 2009?
Hello Marcel29!!!
By the way, what was with the thread in another of your topics? Have you tried the program of bomotec?
Therewith you’ll get the answer if you have a helix-option.
Hello Marcel29!!!
It can be done with a subprogram.
Hello!
I neither would try to turn the eccentric. But you have a Y-axis, so it won’t be a problem to mill it at the Emco.
It would be helpful to know which Emco you have and what exactly the...
Hello Angelo!!!
If the programs were in the controller, then it’s unfortunately impossible. If they were on PC – possible.
Hello Novo81 !!!
Take a look here, the guys discussed it a couple of days ago.
Not exactly your material but manufacturers are there.
http://www.cnc-arena.com/forum/index.php?showtopic=22300
Hello kremsi123!
You can request a demo version at the homepage of AQS under test our products
http://www.adequatesolutions.com/index.html
Hello zimmerzocken!!!
Vc=100-120
fz=0,05-0,12
depending on unclamping length and surface.
For the best result you’ll have to play with cutting values a little bit.
Hello deke32 !!!
In the standard draw-eat is nevertheless a DMU 125P present.
Try it.
Hello Fräsler!
Set the counter at zero with M54.
Set 1 with each read M53.
Hello everybody!
I’m searching for documentation about FANUC 30iA.
Programming manuals, macros etc…
Hello derdernixweiss!!!
In user variables: %USERPROFILE%\Local settings\Temp
In system variables: %SystemRoot%\TEMP
So as it stands here.
Hello banditz!!!
Take a look here:
http://www.topsolid.com/
With Biglias – it’s just a PP case. Ask the manufacturers.
Hello!
Check if you have enough space. If you do, then reset environment variables.
1. open environment variables window (start / preferences / system settings / extras / environment variables)...
Hello again!
Try it this way:
G0 X24 Z-20 Y0
G1 G41 X8,5 F200
G3 X-3,943 Z19,75 I3,943 R4,096 (1/2 Kreis anfahren)
G3 I3,943 Z19,25 (Ganzer Kreis)
G1 G40 X24
Hello!!!
Where exactly in the program is the problem? Is the thread in the middle of the X axis or is it displaced?
It would be well to know the tool and thread Ø… and thread description.
Hello!!!
Great idea!
We have only 5-axis machining centres. People will soon hit on the idea to make a loop from conductor.
Hello
I have the both versions installed.
As all new versions, this one has teething troubles as well. There’re lots of great new features, but I have to work the old version sometimes.
It’s...
Hello matthias123 !!!
Parameter 3202 f0r 9000th and 8000th.
Hello Fax!
What you need is a CAM system.
As the abbreviation of your Auto CAD says, you have only a system for computer aided design.
With CAM system (computer aided manufacturing) it's...
Hello cncsony!!!
Just draw the raw part around the finished part. Then extrude or rotate it.
Then define both of them under definition machine, tool, raw part and finished part. And then the zero...