I fixed it, I went through all the ports and pin settings with the ARF setup guide, everything seemed correctly set except the emergency stop was not assigned to pin 5, it was on pin 0 the same as...
Type: Posts; User: Studiovape
I fixed it, I went through all the ports and pin settings with the ARF setup guide, everything seemed correctly set except the emergency stop was not assigned to pin 5, it was on pin 0 the same as...
Ok, solved these, moving on to new problems in my next post
Not backing off limit switch issue.....
Hi folks,
When I Ref X axis it travels to the limit sensor (inductive proximity type) and just stops, the small led light on the sensor body itself stays...
Hi folks, finally after my ARF 6040E has been in it's crate since November last year I have cracked open the crate and am slowly putting things together.
it seems like a long time ago I researched...
Hi folks, so it looks like I am inches away from owning a new 6040 CNC, it will be about a month before I receive it assuming I pull the trigger in the next few days.
In the meantime I'd like to...
I'm interested in this answer too, I have been reading and reading all the mixed reviews all over the internet for months and months, at present I am looking at ARFCNC :...