I am sure it's going to be obvious once someone points it out to me, but none the less I am confused.
I have a NGC HAAS VF-3, 30 pocket tool changer. On the offset page for the tools, it goes to...
Type: Posts; User: Sean3073
I am sure it's going to be obvious once someone points it out to me, but none the less I am confused.
I have a NGC HAAS VF-3, 30 pocket tool changer. On the offset page for the tools, it goes to...
Craig,
Thank you for taking the time. I total get what you are saying. Although I think I have more than likely phrased my question poorly. See attached pics.443660443662. If you notice, the...
In Fusion 360 CAM, you can program a 1/4 - 20 pitch at .05. But if you look at the example tools for metric, example M4 0.7, it lists the thread pitch at 0.7 and the actual tap diameter at 4mm....
Thank you for the information!! I thought I was loosing my mind. I am going to print out a weld symbol chart, LOL.
What does this call out mean. The part is GD& T.
Specifically, the symbol, and the (.38). To the best of my knowledge the CHEVERON is a sideways angular call out, but what is with the underscore...
Makes sense. Thank you
Fusion 360 is my CAD. The question, when chamfering something per a call out of (0.13 x 45 Chamfer), see attached image for this call out,,,,, is that the distance down, and distance over? (see...
I know this is an old post, but where would one find that heat sink, (square two fans). I've looked all over and can't find it.
It’s time for me to buy a replacement 80W tube. I believe mine is going bad. I have done research and there is a ton of tubes out there, along with US distributors and a much higher price. I am...