Search:

I took a wild stab at feeds and speeds. Hopefully the video works. 9mm x 3/8 pins to locate self centering vises on a fixture plate.

https://youtu.be/vn5iYbGRals?si=H-RJGfYqMhyWZfL7

Try changing the post processor to use 5 digits. I did that to remove errors using compensation on my milltronics mill. Letting your controller do the rounding may help.

For some reason the pictures aren't showing on CNCZONE but they are on industry arena or whatever the hell it is.

The way yours is currently wired in your picture the middle leg is not hooked up...

If you attached anything I am not seeing it. What year is it? My 2000 MB19D is 3 phase. One leg only goes to the drive for the main spindle motor.

Side note. HAAS info incoming......


We started up a 2014 TM-1P Haas that we shut down a few months ago to ship to another facility at work. Ended up not shipping it. I was given the task to...

Autodesk Inventor for cad and cam.

Going to reach out to Bob and see about getting a some type of upgrade from him as the gotek usb is not working repeatedly.

Well **** I only saw the first with no sound. Sorry about that and thank you.

Can you share the edits you made to the post or a working post for doing this? I would love to make some small parts this. Hoping to get a cnc mill in the future, but not yet. Really wish I could...

Realized that the M0 is no good. Ran a test part that was adaptive then contour with same tool. It stopped and was waiting for me. I thought it would only be after a tool change but it looks like it...

That makes sense. I don't have a tool changer or a full enclosure. I do have some plastic walls sitting on the table.

Currently I'm shutting off a ball valve during the tool change so it doesn't...

THANKS!

I think I got it. It was just before the "prepositioning" section and I moved it just after. I also added a M0 with a comment on the same line telling me it is a pause for coolant and...

Do you remember how you had the coolant wait to come on?

sorry laptop and cnc are not connected. I removed the cnc floppy and replaced it with a usb to save to a thumb drive. usb works to copy from thumb drive to cnc. files from cnc to thumb drive are...

I was using the floppy on the mill and an external floppy drive for the laptop. Setup a gotek usb and thought it was working correct. formatted usb with the software I found here....

Got an external floppy drive today. Copied 2 files to the mill and ran them successfully. file 1 faces off the top. file 2 profiles around. I played with editing them on the mill controller. I...

What are my options to get gcode foles exported from inventor to the mill computer? Do I just get an external floppy for my laptop or do something else?

I thought I would be less likely to make a mistake just changing the z offset. For example mill, center drill, then drill holes 2 different sizes on top of part. Flip part to front side, reset z,...

Pictures

Pictures

New Milltronics owner here. I just got a MB-19D with a centurion 6 controller. I was able to get it unloaded after my loader wouldn't pick it up. I built a dolly around it from a haywagon axle and...