Search:

When my laser went down I basically panicked. I have a trade show this weekend and I was building up my inventory. In my haste I ordered the 50w tube, which as you know didn't fix the problem. I...

No green resistor and no interlocks. My machine is pretty sparse. I did notice that rather large crack in the top of my flyback transformer and just worry about ordering that part then finding out...

That all makes perfect sense. We used to have a handful of repair shops around here, but the last one went out of business a few years back. If I order a new flyback transformer it will take about...

I got the new tube today and installed it. As expected, nothing happened when I tried to test fire it. I decided to pull out the psu and open it up to see if anything looked off. Well the thing that...

You still around buddydog?

So, I just did the peanut test. Instead of standing on a inverted 5gal bucket, I just attached the Styrofoam to a string and hung it from the ceiling about an inch from the red wire near the end of...

Unfortunately I won't be able to work on troubleshooting my machine tonight. We have some strong storms brewing and I don't want like to have my machine powered on or even plugged in when it's...

I took some pictures to go along with this post. I first tried putting the paper in front of the end of the tube and as expected, nothing happened. Next I tried pressing fire and looking in the...

I enjoyed reading your post, very informative.
I recently had the laser tube go out on my 50w machine, at least I think that's what happened. I have a cheapo chinese machine I bought used on...

How thick are the aluminum plate pieces on the sides of the gantry? Do you notice any flex with it? I have an old x90 made out of mdf, i can "bend" the router up and down probably around 3mm. Just...

I'm in the same position you are/were. Just wondering what you decided on. I love my x90, but the amount of flex is just way too much. Im thinking about using all the electronics and rebuilding...