Search:

My shop isn't in Melbourne but I thought I might let you know about me anyway

PDH PRECISION ENGINEERING in Wangaratta, North east Victoria

I do a lot of work along the lines of what your after...

Hi,

I am looking for someone in Melbourne, Australia who does maintenance and training on Cincinnati CNC mills

It would be great if anyone can help

I stalled my machine when drilling and now the spindle motor won't run

I pulled the motor out and got it checked and it seems to be ok

The next thing to look at would be the spindle control...

Greg

I have a X7 2010 model and I have had alot of trouble with the spindle driver and torque of motor. If you get 2011 model with VFD spindle hopefullly it would be a lot better.

I have also...

Hi Neil

I understand what your saying about the axis speeds. I haven't had a chance to look at it yet. I have attached the full controllor manual in PDF.

Regards, Paul

Syil sent me a second spindle board which I have installed and it is working in cnc mode with no problems. It starts up at all rpm.

Just when I thought I would be set to do some serious machining...

I wont be changing to Mach 3 control unless I absoutly have to. The contoller should be ok and shouldn't be causing my spindle issue's.

I received an email from my distributer today. He has...

When I ordered the machine I thought it would be best for it to have it's own industrial controller.

The worst thing now is that Mach 3 is more common and I would have been able to get a lot of...

I understand what your saying. What's annoying with respect to my decision on buying a Syil mill is that I thought it would be best to buy a new machine with a warranty. I've bought this machine...

The position your at is where I was about 12 months. Trying to decide whether to invest in a small CNC mill or not. Well this is how things are travelling for me.

Firstly I'm not a company. I...

I don't use Mach 3, I have the ADT industrial controller. Have any of your machines got that controller?

I can't use the spindle manually when the front switch is in cnc mode!

Thanks for your...

Hi Neil

Thanks heaps for your help. I don't use Mach 3, my machine has the Adt industrial controller. Have you had anything to do with them?

I can control the spindle in manual. I moved the switch at the front of the spindle from 1 to 0 and ran the spindle though it's rpm up to 6000rpm. Works fine in that mode.

The problem is when I...

I will look forward to hearing from Chen

It is an understatement to say I need this machine running as soon as posible

I do Machining work for the company that builds planes at the old Wangaratta air museum hanger. I can easily arrange for you to have a look through.

I'm going to Melbourne on the 24th but back on...

I have just fitted a new replacement board from Syil that they tested before they sent it to me.

This is so frustrating!

Syil have offered to upgrade my spindle motor and drive to the VFD...

I checked out the wires you spoke about. They seem to be conected fine.

I had the machine in manual mode and tried running the spindle through different RPM. It wont run below 500rpm and when...

The power resistors are not hot at all

The LEDS are lit up fine

I went to the machine tonight and set it to run at 1000rpm and it actually worked. I haven't changed anything it just worked for...

After waiting 3 months for a X7 spindle driver board from Syil China the spindle still wont run

I can't see any loose wires

Syil asked me to check the voltage from the controller to the board...

Hi

I know a guy who has a business down at Ocean Grove who could do your job. Little bit of a drive but he could help you out.

If not I could do it but I am in north east victoria.

Regards,...

I have just got my E7. Which I believe is the new name for the X7 with industrial controller. It's sitting in my shed powered up ready to go. I just need to talk to my dealer so I can get a run...

Hi,

Will the X7 be updated with larger axis travel in the future. An update for 2011 model would be great.

Thanks, Paul

Thanks for your advice. I'll keep the X3 option in mind.

I like the Syil X6 for it's size and spindle speed, but I'll have to work out what I can afford.

Hi guys,

I'm looking at buying a Syil X4 or X6 milling machine. The thing is that the new owner is in Queensland and I live in Wangaratta, Victoria.

I'm hoping someone will own one of these...