Search:

Well as luck would have it my Chinese spindle controller is on its way out. I thought I would take this opportunity to upgrade from my parallel port to a USB and run a more current version of...

, John DiMarino <[email protected]> wrote:





Up to now I have been cutting using contour for all my machining needs . I wanted to start using "V carve" instead . The CAM software (Carbide...

Has anybody used the software product SimplyCam. I'm trying to use the functions of splitting and joining entities. I tried contacting the author with out to much success and was hoping that somebody...

OK, I just want to doublecheck so I don't fry the board.

Drive - On other board gets connected to Drive on new board. Note: they had given me a wire with two connectors at each end so it shouldn't...

I ordered the board from https://www.omiocnc.com/accessories/circuit-drive-board/pw3618-power-board.html Unfortunately it looks different. I could use some help moving the wires over. I have...

Thank you for your help. I'll order the board and keep my fingers crossed.

What about the other board. What does that board do?

The spindle start up when you turn the spindle switch on It runs for about 3 seconds. The spindle motor turn freely when the powered is not on. None of the components seem to be hot. Fuses seem...

I been in contact with the manufacturer no luck. They just stop responding. The spindle controller is 110v 3 axis. At this point if I can't get a replacement box I might as well throw the CNC in the...

Any suggestions as to a site where I can purchase one

I have and Chinese router 3020t which I have been using for several months now. I had a jam and broke the bit. When I went to restart the job I noticed that the spindle would only spin up for a few...