Search:

I rent and share a basement with my landlord. My basement is often very humid and there are windows open during the summer, which is out of my control. I have equipment stored elsewhere but don't...

New to using a metal lathe and bought this set of carbidges because I've heard a lot of good things about using carbides and went with this 3/8" indexable Triangle inserts set form Little Machine...

3) My vertical THK Z-axis doesn't have a cover for the linear screw (al my other axis came with covers) and it's clear that milled chips will end up on the screw and this will become a problem. I...

I need a way to cover my ball screw to keep debris out. Any suggestions?

Not sure why the picture comes out sideways, it doesn't on my desktop.

Looking for a Dial Gage Holder Mag Base. Like the Noga setup but seems a bit pricey and figured there's a chinese knockoff that people like. Any suggestions?
...

Thanks I tried and no luck. Support suggested I run V in to INP1 and Com but I tried that and no luck either. I ended up buying an Acorn board and have everything working as it should be. Would...

Looking to buy some T-Slots for mounting on my mill. Where should I be looking to buy some without breaking the bank?

Yep :) The posts/experience I found online aren't promising. I set the software up to have an active low E-stop so I can run Mach3 and virtually hit the E-stop button. I can get the software to run...

Good idea. Here's a picture of my board:

The board is powered to by USB and 24V. It is recognized that it is connected by my Mach3 software when I plug the USB into the computer but non of the I/O...

Interesting, that's what it is. Maybe I'll try the demo version to be sure and will try to update it if I can also. Never even seen a picture of video of my motion controller card running (looked...

I bought a Digital Dream CNC DDUM5 V1.0 5 Axis Mach3 USB Card 5 Axis USB Controller Board and have spent 4 full days trying to get it to work. It connects the Mach 3 and Mach 3 recognizes it's...