Search:

Have you tried adjusting the baud rate? I've seen where some of the 5000 controls will pick up wierd glitches at certain baud rates. Bumping the rate up or down a bit might clear this up.

Are you looking for advice on the main control or just that side-PC they used in the 32MP systems because, most of the places I've dealt with have let the on-board PC die and just buy a stand alone...

What control does this machine have? I know the old OSP controls had Bubble memory to store the system software. Bubble memory errors on those controls usually meant you needed to reload software....

Hi guys, service tech here. I do a fair amount of Fadal work and, at a customer today they were showing me their new 4020B. They mentioned that they were having trouble getting it serviced. Sounds...

If you find the leak is coming from one of the bearing blocks, you may want to look close and see if the grease has been washed out of the bearings, if you catch it soon enough it may be worth...

Just to clarify, what makes the Fadal non-compliant is 1) the control looks for an open state on the switch so you can un-plug or cut the wire and run with no interlock 2) the door switch isn't a...

Here's a tag from one of our machines. Okuma does use an embeded version of XP. This is why it dosen't need to be updated and why the hard copy of windows comes on an Okuma branded CD. Although it...

You may want to contact your distributor about borrowing or renting an 8" floppy drive and interface board, most of the distributors have a kit for the older 3.5" drives, a few of the older ones...

Your best bet may be to see if the auction house can put you in touch with the last owner to see if they can give you the copy of software that should have come with the machine (usually kept in the...

As long as we're on the subject, I'd like to add that even if you're not capable of/ comfortable with the hard drive imaging, you should at the very least be making backups once every couple months....

If you haven't figured your issues out yet, here's the description of that alarm from the manual.
"The pallet presence detection limit switch (at the pallet magazine side) is not turned on when the...

littlerob- That looks like it may be an auto-search function of the browser. The same link is inserted every time N330 appears. A similar link showed up for IPad. (unless you've both been inserting...