Hi All
Has anyone here any experience of using a JMC iHSV57-30-18-36-21-38 servo motor in a Z axis (with a 2.2kw standard chinese spindle motor) without a brake on the servo. Does the axis drop the...
Type: Posts; User: the great waldo
Hi All
Has anyone here any experience of using a JMC iHSV57-30-18-36-21-38 servo motor in a Z axis (with a 2.2kw standard chinese spindle motor) without a brake on the servo. Does the axis drop the...
Hi Craig
Try this
forum.cncdrive.com • View topic - WHB04B-4 Pendant Plugin
cheers
Andrew
Yes
Sent from my XT1580 using Tapatalk
Hi Daz
Food for thought.
cheers
Andrew
I'll be interested to see where the software is to be found! or maybe they use the leadshine software?
Cheers
Andrew
Ok Thanks Peter
Andrew
Hi Peter
I was just replying to "remember to correctly match the amps of the driver to the motor" ? The motor driver kit mentioned in my original post should have a matching driver for the supplied...
Hi Peter
I was just wondering would I need to use the tuning software for these drivers as there don't seem to be any dip switches to set the current on the drivers.
Cheers
Andrew
Thanks for the tips Peter. It'll be a little while before I can get all this together and I still have to assemble the cnc machine ( ...
Hallo Peter
Thanks for the reply.I think I shall go with the three 36 volt supplies. There is a 17.5 amp 36 volt supply available with pfc but it works out at about twice the cost.
...
The driver manual recommends 36 volt as a supply voltage to stop problems with back emf ?
Andrew
Hi
I intend to get 3 of these https://www.omc-stepperonline.com/1-axis-closed-loop-stepper-kit-3-5-nm-495-74-oz-in-nema-24-closed-loop-stepper-motor-driver.html
and run them with a 36 volt...
Paulimot doesn't have any cnc stuff!
Try these guys
Sorotec GmbH
diese vertreten durch den Geschäftsführer Roy Kloss
Withig 12
77836 Rheinmünster
Deutschland
Telefon: 07227-994
They probably have all you need.
Cheers
Hi Ramazoti
It might be a good idea if you list what you are using as a controller box how it's all set up. You haven't really given any information that could help someone troubleshoot your...
I am in the process of putting together a cnc controller box using 3 leadshine em705 stepper drivers 48 v 600 watt power supply + 12volt power supply for uccnc hdbb2 E-stop 3 homing switches...
Hi All
I was trying to get onto the UCCNC forum and website with no luck, has anyone else had the same problem 404 error
TIA,
Andrew
Try and get an official version, you might find it works.
Cheers
Andrew
Latest version 1.2016
Cheers
Andrew
Hi Mogal
Just out of interest where is the screen divider. ( I'm new to this stuff)
Cheers
Andrew
Latest update.. 1.2015 now available.
CHEERS
Andrew
I for one would be interested, and there may be many more users that would be to if they knew of it's existance. Maybe a link from the UCCNC homepage would be useful.
Cheers
Andrew
3d digitizer probe routine would be useful. Also a simple x y z axis screen ssf file for beginners like me so that the screen is not so cluttered up. Function description when mouse moved over...