that turned out really nice
Type: Posts; User: Raptorjesus806
that turned out really nice
here is a couple that we have here at the shop
this is the only Old English font i have, hope this helps
hope this helps
http://www.cnczone.com/forums/attachment.php?attachmentid=369008&stc=1
Custom garden drain plate.
all done with a waterjet. i still have the sand in my teeth :P
we space ours at .03 inches / .762mm very great for common line cutting
if its not a common line i go with .1 inch
here is how i do it, i make the program with autocad and after i get it drawn and zeroed out i drag into alphacam using draftsight, program it, output it to machine, then i open up xilog parsifal and...
we did buy ours used, but for a "deal"
ive tried the mdi to unload the tool but still gives me the "PLC30"
on the fires im thinking we have the feedrate off, that or we are just dulling our...
hitting F10 will clear the error but comes back up as soon as you start it back up again.
the only manual we have it a wiring diagram and im not to keen on reading it.
i can somewhat run the...
Thanks for the reply
if i manually load in any of the tools it knows it has said tool number but it still throws the "PLC30 Cycle Tool Changer" but the spindle comes down to the cutting position...
relays are fine. whats happens is when i load a program the tool changer will spin to the correct tool and then it just sits there, if we load the tool in by hand the spindle will drop down to the...
first off if this is in the wrong sub-forum sorry, also sorry for run ons and etc.
im having problems trying to get our Machine to run, we had someone hit the e-stop mid tool change and now...