Search:

This happens when the machine is not level and aligned.
You can check by turning a diameter in the sub and check it with a dial off spindle 1.

Sent from my SM-G925I using Tapatalk

There is a free pgm called desk engrave. Its limited but may help.
Other than that oay for cnc write and you can do it all.
But if you know how to write a macro you can do your own.
If you only...

You dont need DNC option to run a big program. All you need is a transfer software program on your PC and a cable to the ISO RS232 port and run the machine in Tape mode not memory.
You will need the...

The Chik and Bock vices are good when low clamping forces are adequate. We have been through 2 speed, hydraulic and air over oil but the only vices we run now are the Kitagawa mechanical VQX vices...

What control?

You have a bunch of Okuma's why would you change? We have 3 integrex machines with the old wedge type construction that are still great machines but our newest Integrex with the straight out Y axis...

To clear things up...re ultimate not released yet. We have inventor product design suite "ultimate" this gives us HSM express and fusion 360. I only asked how good it is because we only have 2 CAM...

Since this is a Fusion 360 thread can I ask how good it is? We have 9 seats of Inventor ultimate and get the lot but have only used HSM works for a few jobs. We run NX and Delcam for most parts is it...

Cant comment on the pics but with a farro or romer arm with a laser scanner you can easily create stl files of the part. Bring it into any modeling package...we have NX and Inventor both will do it...

Since you have solid works. Design 10 dummy parts that will use all of the functionality and canned cycles that your machine is capable of. Offer the tender for a cam package with 50% down and the...

Go to the renishaw website. There is a lot of info there.

You can VNC into any PC Mazatrol control. Put your machine on the network and with remote desktop you can look at the control from anywhere on the planet with an internet connection. When you VNC...

You can get all you need out of dprint.
We have a matrix and output values from a renishaw probe as well as inputting values into variables from an excel spread sheet. We also run cyber scheduler...

Our HCN8800II has tool Rfid chips in the pull stud and we do a similar thing. We have 120 tools but need to swap tools while the machine is in cycle. We dont run tool numbers but group numbers. This...

You will need to change a few things like tool call and maybe chuck open close. Tailstock forward commands. Do this in notepad on your computer. When you have it edited correctly save it with a .eia...

What control?

Sent from my GT-I9305T using Tapatalk

Sorry the name is only used for the card.238280

Sent from my GT-I9305T using Tapatalk

I cant remember the name that you MUST call the directory on your computer. It is in the book. I will check ours on Monday.

Sent from my GT-I9305T using Tapatalk

Centrifugal will not give you what you want. You need Investment casting or lost wax. They can 3D print a wax from your .stl file. Then they dip the wax in liquid ceramic. This is done several times...

You can investment cast tool steels and other heat treatable alloys. Most investment casting foundries will cast you 4140 or 4340 ang you can heat treat as well as nitride.

Sent from my GT-I9305T...

Run the simulation and you will see the cycle time. We have the HCN8800-II

After you have it open you can set the IP address and store and load files without any software.

Sent from my GT-I9305T using Tapatalk

Your most cost effective solution will be to find an "investment casting" foundry that has a rapid prototyping (3D Printer) these ones build the part in wax. Then this wax model is used to cast the...

Now that I have seen the pics you do realize that internal sharp corners cannot be machined. We could do this in our integrex machines and then finish the internal shape on our 4 axis sink EDM. We...

We use both NX and Inventor. I have used Inventor to convert point cloud files .stl to solids for our CAM system. The reason the J300 integrex cant do it is because it is not 5 axis simultaneous. ...

Some controls add the H offset again when you change from G54 to G55. Try canceling the tool offset at the end of the part in G54.

Sent from my GT-I9305T using Tapatalk

We use Mazak products for mazatrol pgm transfer. Matrix cam and cam ware for the older ones. Iso pgms all require a .eia file extension. Iso files are simple text files that you can write in...

Download a piece of software called desk engrave. You can even load it onto the control. Give it a gi.

Mr_MRC

We have 1 mazak with a smart control. You need to look in the book or mazak can help you. There is a parameter that needs to be changed and when you change it it opens uo another menu soft key where...

First you need to understand that you can not transfer iso through the cmt rs232. There are 2 ports on the machine and you need to use the cmt port for mazatrol and the iso pirt for .eia pgms.
When...