Search:

The AB7300 parallel punch port or rs 232 port need to be connected to the
facit 25 pin or the aux 9 pin serial port on the cimnet BTR. The proper BRM file to activate the port needs to be loaded...

The Cimnet BTR on a AB7360 CNC Works very well. What type of tape are you trying to upload? The software you are using is important so is the PC port buffer settings. I specailze in the Binary...

Rybett, Advanced Digital Research and Cimnet all make a BTR for this machine. Simple plug in. Rybett LPT runs from the parallel port under Windows 98 to DOS 3.1.
The ADR has 128k standard local...

I am looking for information on the Tape reader on this control.
The reader is Addmaster 640-3. The card on the rear of the reader has SE 104c on the artwork.

I am looking for the Input &...

I have a copy of the CD from GE/Fanuc. It has about 590mb of manuals and prints. You pay the shipping and I will make you a copy. I purchased this CD years ago for service calls. Trying to find a...

Hi Drew; The DLL error is a PC problem with a dynamic link library file. This is normaly caused by a incomplete or bad program installation.
Bill

Hi Jeff;
Go to the Refresh Your Memory web site and download the Trial PCEditor. Also download the Manual. In the troubleshooting section the Fanuc and Serial port problems
are listed.
William...

I have interfaced more Bridgeport controls that I can count. Grecco, Rybett, ADR and Cimnet all have Behind the tape reader interfaces that can dripfeed long files.
The Rybett part number for this...

I have done the cin900 exectapes for many customers. You need to load and send them in Binary format. I use Rybett Camb to upload the tapes to disk from a serial or parallel tape reader. I use a ADR,...

JB;

Finding a spare control for parts sound like a good idea.
Bill

The fanuc3 can only load the memory and run from memory. CNC inovations has a setup for sequencing long files by using modified keyboard. The software will load the memory, then auto erase then...

If you can find a serial tape reader you can load the tape into a computer. Years ago I made loads of parammeter tapes for Amada we then put the tape on the server loaded them into the BTR and sent...

Hi JB;

I have the cabling, parameter settings in for hundreds of CNC controls. I would fax you a Anilam Crusader data sheet if you wish.
Bill
CEO WTC CO
[email protected]

Sys Man;

Your computer speed is not the problem with the Fanuc serial errors.
Go to control panel, then system properties, hardware, device manager, ports, com1, port settings, advanced set the...

Hi Dave;

I sell Cimnet, ADR Nc Connector and Rybett BTR's. I also Have an exectape
copy service to Upload customers Exec Tapes to disk. Price $450.00.
All the BTR's can send the exectape into...