Dear FURQAN AHMED,
The website to visit is fanuc3mdripfeed.com
As explained in my post, all they do is DNC conversions for these Fanuc 3M controls. You will get the whole package: upgraded chips...
Type: Posts; User: Chipmonkey
Dear FURQAN AHMED,
The website to visit is fanuc3mdripfeed.com
As explained in my post, all they do is DNC conversions for these Fanuc 3M controls. You will get the whole package: upgraded chips...
Fanuc 3M DNC upgrades can be had from fanuc3mdripfeed.com which is a website dedicated to upgrading these old controllers. For more modern controls DNC is standard stuff, but the 3M control needs its...
To upgrade your 3M control to DNC/dripfeed (which is what you're really asking) you need to visit fanuc3mdripfeed.com
That's all the website is about: upgrading Fanuc 3M controls to DNC. Complete...
For extensive instructions on how to "dump" (record) your parameters go to the website that sell your chips (if it was "from a guy in either NZ or AUS" then it will be fanuc3mdripfeed.com). On their...
It sounds like you have either a handshaking or parameter setting problem. I'm assuming you bought the upgrade chipset from fanuc3mdripfeed.com which has been working on 3M controls for years now so...
DNC (drip feed) for your Fanuc 3M can now be had for US$370 from:
fanuc3mdripfeed.com
But for that "half price" they expect you to send them your parameter and diagnostic data for their "3M...
Fanuc 3M controls can be upgraded for DNC control. Our machine had the upgrade which took twenty minutes. Eight chips on the main/mother board were changed for a new set. The chips were in sockets...