I'm using a Hwacheon Ecomil 65V with Fanuc 18M controller and have been getting an error on startup "Error 414 Z axis error detect- servo alarm." The last time this error came up, the oil reservoir...
Type: Posts; User: andywids
I'm using a Hwacheon Ecomil 65V with Fanuc 18M controller and have been getting an error on startup "Error 414 Z axis error detect- servo alarm." The last time this error came up, the oil reservoir...
Hi,
I'm using a Hwacheon Ecomil 65V with Fanuc 18M brain. Upon startup, the oil cooling unit does not turn on as it normally should and I'm given an error "414 Z-axis error detect." I am not able...
Thanks a lot gentlemen. It was in fact the limit switch. It was stuck and after some prying and lubrication, the machine is back in business. Thanks to everyone for the fast and accurate responses. I...
I am running a Hwacheon Ecomil 65V with Fanuc 18M controller. While performing a test run of a program, I encountered an Overtravel alarm in the -X direction. The solution is normally simple:...
Gentlemen,
Thank you VERY much for your help, between all three replies I have managed to work my way through the problem and have had excellent results. It's a basic problem but I touched the CNC...
I am new to the world of CNC and have been given a simple bolt circle to drill on a Hwacheon Ecomil 65v with Fanuc 18m controller. The G code generated from software is in reference to the Absolute...