I am trying to add a 2nd touch down probe to UCCNC. My problem right out of the gate is that as soon as I assign a PIN and Port number to the second probe settings the first probe stops working. I...
Type: Posts; User: bhdavis1cnc
I am trying to add a 2nd touch down probe to UCCNC. My problem right out of the gate is that as soon as I assign a PIN and Port number to the second probe settings the first probe stops working. I...
Got side tracked from the project. Back on it now.
Thanks for the links Arturo. That should help.
BH
I have one of those inexpensive touch down probes as shown in the first image below. I have it wired to Port 2, Pin 15 on my C76 board. The probe base is wired to Pin 15 and the probe alligator...
Anyone know if there is an Enroute post processor for UCCNC ?
Thanks,
BH
When I built my CNC4PC control I included one of the C48 touch down probes (an earlier version of the one in the photo). It is mobile probe and I use it to touch off my material top surface location....
I tried outsourcing the 3D printing. They did a lousy job. All were functional but looked awful. It has an internal dome that needs to be laid out carefully without supports.
As to machining...
Thanks. Glad it was sorted.
Update: I believe I've resolved the speed issue with the purchase of a Flashforge Adventurer 5M Pro. It runs significantly faster and hotter, plus has a bunch of...
How to speed up a 3D print ?
I'm 3D printing lots of parts similar in nature to what I'm showing in the three images below. These are hollow on the inside with an approximately 1/4" thick...
Arturo,
Please reply. Are the TWO jumpers for USA or INTL only for Relay 1 and Relay 2 ? Or do they affect some other feature on the UC300ETH as well ?
Bernie
Arturo,
I gave it a try and moved the 2nd jumper over to USA. THAT DID THE TRICK. Thank you !!
Question: is there anything else this change might affect? Something I should keep an eye out...
Arturo,
There are two jumpers at the USA / Intl location. I have the top one on USA and the bottom one on INTL. Should they both be on USA in order for the 2 relays to work independently on an...
Arturo,
I've been away but am back home now. I thought I had it on US setting but will double check in the AM. I'll report back.
Much appreciated.
Bernie
I have this posted at the end of a related thread but figured I'd post it as a new question here.
I'm working on getting spindle reverse rotation working on UCCNC with a C76 control board. Up...
Okay..........headway but I have a problem.
Entering an M3 activated Relay #1 and the spindle runs CW as it should.
However entering M4 activates BOTH Relay #1 and Relay #2. This is confirmed...
Thank you Arturo. As I thought. Much appreciated.
I posted this on the CNC4PC page here but that gets so little activity I figured I best post it here as well.
...
I need to add a spindle REVERSE feature to my C76 with UCCNC setup.
I currently have my C76 to VFD wired as follows: RELAY 1 input terminal on the C76 board is going to DCM on the VFD and RELAY...
I'm getting nowhere trying to find this online. Does anyone know the thread pitch of a SYOZ 20 collet nut?
It looks like it might be somewhere in the 25mm x 1.7 pitch range but I haven't been...
This is what's behind my spindle change.
https://rapidchangeatc.com/
I'm retired so my router is purely for my enjoyment and some fun money from things I make on it. I sold my business in 2016...
Thank you for the advice.
40,000 rpm !?!? What are you cutting with it?
BH
- - - Updated - - -
I'm considering replacing my old 3.75kw Perske spindle on my 4x8 cnc router with a 4kw spindle. However my Delta VFD is rated at 3.75kw.
Is that extra .25kw oversize on the new spindle going to be...
I'm
I'm not at my Enroute computer right now so can only give you a general guide to this.
Basically Enroute PANS by pressing the left or right mouse button while holding the CTRL or SHIFT key, and...
Thank you. That is what I was suspecting to be the case. I'll have to look more closely at the axis settings on that backup laptop.
Much appreciated.
BH
[QUOTE=arturod;2525036]Did you get this sorted out?
Arturo Duncan
https://cnc4pc.com[/QUOT
If you read my original post more closely you'll see the problem was resolved before I even posted...
Had a failure to launch issue with UCCNC the other day that I finally tracked down to network interference from my network switch. Once that was fixed everything was fine.
However in tracking...
Just playing in CNCzone forums this evening and stumbled on your post from back in May. Have you sorted this yet?
If not ask your customer to save the Fusion 360 file as a .STL file. Then you...
In Fusion select the WINCNC post processor. This will probably work for you.
BH Davis
Enroute 5 with 3D drawing and tool pathing for sale. USB dongle inlcuded. $1500.00.