Hello. I am trying to compile a post processor using a baht file. But I get an error
474314
Can you tell me which date format to use in the baht file in the Expiration Date parameter?
The file...
Type: Posts; User: ZU31010
Hello. I am trying to compile a post processor using a baht file. But I get an error
474314
Can you tell me which date format to use in the baht file in the Expiration Date parameter?
The file...
The program code must contain a tool length compensation code.
Example for tool ? 1:
M6 T1
G43 H1
You need to select the main relief layer and create a vector border around it. Then go to an additional relief layer and using the resulting border, zero the relief from the outside.
You need to delete (zero) the part on the texture layer that you don't need.
What kind of machine do you have? And what help is needed?
WHAT, no one has any thoughts on this matter???
2020.0
https://www.cnczone.com/forums/attachment.php?attachmentid=452330&stc=1&d=1605506285
NEW
https://www.cnczone.com/forums/attachment.php?attachmentid=452292&stc=1&d=1605469086
Yes, a 90 degree cutter. But this is an equilateral triangle. And the angle of inclination of the surface is taken known. Therefore, in this case, you can process the polyline with the calculated...
See the bottom link in the previous post.
Create a 3D model and process with a 3D strategy.
https://cloud.mail.ru/home/_TEMP/Video_2020-11-15_204209.wmv
https://cloud.mail.ru/public/5MmW/Zt7DrQPb1
2020
https://www.cnczone.com/forums/attachment.php?attachmentid=452278&stc=1&d=1605457648
I have attached the file in a previous post.
Do you have a 5-axis machine?
What is the diameter of your cutter?
Take a 120 degree cutter. And do 3d engraving
452272
https://www.cnczone.com/forums/attachment.php?attachmentid=452274&stc=1&d=1605452751
ZU converter v2.0 was made for convert files TP that were obtained in ArtCam, write to a floppy for using by machines with the reception control RT480, RT481.
Moreover ZU converter v2.0 works with...
Hi! I'm working on the BIESSE machines ROVER with CNi controllers RT480/RT481.
To create Toolpath I use ArtCam and ZU converter v.1.5.
About work of converter it is possible to read here and here....
Для скачивания программы ZU converter необходима регистрация на сайте!
При регистрации не используйте переводчик GOOGLE!
Проходите по ссылке.RT480
Для покупки программы необходимо заполнить ордер....
Hi! I'm working on the BIESSE machines ROVER with CNi controllers RT480/RT481.
To create Toolpath I use ArtCam and ZU converter v.1.5.
About work of converter it is possible to read here and here....
Hi! I'm working on the BIESSE machines ROVER with CNi controllers RT480/RT481.
To create Toolpath I use ArtCam and ZU converter v.1.5.
About work of converter it is possible to read here and here....
Hi! I'm working on the BIESSE machines ROVER with CNi controllers RT480/RT481.
To create Toolpath I use ArtCam and ZU converter v.1.5.
About work of converter it is possible to read here and here....
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
I propose for your attention ZU converter. This programme for convert of files *.dwg, *.dxf, *.ai and the other sizes...