Search:

This makes a lot of sense, I'll try connecting it this way. But wouldn't the VDF have a voltage for the switch to work? for the VDF to know the switch is closed wouldn't it need electrons flowing...

I also thought that was strange. I think they were trying to explain that it is a thermal switch, a thermistor connected to a mechanism that makes the connection on or off.

Hello everyone,
I just got a Chinese ATC spindle that comes with a PTC 140 Thermistor and it has two cables coming out of the spindle that are about 24AWG. I contacted the manufacturer and they...

Marv, thanks for the reply. I did suspect that it could be the splines from Rhino being imported into Fusion. They are segmented in some parts. Would it still cause stutter even in parts where the...

Hello, I need help chamfering aluminum sheet 2mm thick on a CNC router from the CNC experts!

I'm trying to make an aluminum guitar pickguard with chamfers on the outside edges. I made a bunch of...

Finally figured out how to properly read spindle speed from g code on the the Richauto DSP if you want to change it to custom speeds. VFD settings have to be changed if you want to enter your own...

Hello all. I know this is an old thread but I’ have a similar issue with the Richauto A11.

I changed the spindle speeds under spindle setup from 1-8 and I also set the DSP to read spindle speed...

Hello. I ordered a 6090 router from China and the power cord coming from the control cabinet that houses all the electronics (spindle 3kw, motors, DSP control etc) doesn't seem to have ground. Is...

Hello. I'm new to CNC and after building a hobbyist machine (carve king) I've decided to leave that to wood/plastic cutting/carving and get a dedicated machine for cutting Aluminum or other metals...

Hello.

What type and size endmill/endmills would I use to cut 1mm aluminum sheet and also make #6 screw holes which are around 3.3mm in diameter. I'm making a guitar pick guard and I'm trying to...

Hello,

I'm new to CNC and was wondering if it would be possible to CNC a plastic insole using something like a Millright Carve king (or similar hobbyist machines). It has a Z working area of 4" (I...

Hello.

It's been really difficult finding plastic blocks for CNC let alone PCTG blocks.
The blocks need to be 2" tall and at least 7.5"x4"

If anyone can guide me in the right direction it'd...